The 1/12-6/12 roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations). A Storm Collar, sold separately, is required to seal the flashing. Construction Material Our roof flashings are made of 304 stainless s
The 1/12-6/12 roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations).
A Storm Collar, sold separately, is required to seal the flashing.
Our roof flashings are made of 304 stainless steel to deliver superior safety and performance.
Certified and listed to the UL 103HT standard and designed for appliances that are listed for use with a 2100 Degree Fahrenheit High Temperature chimney system. It can be used with wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, pizza ovens and other residential heating appliances fueled by wood, gas, coal or oil.
Note: Do not use with forced draft, positive-pressure appliances.
The UL 103HT chimney is designed and tested for maximum continuous use at 1000 degrees Fahrenheit. UL certification requires a stringent and rigorous test including a one hour burn at 1400 degrees Fahrenheit and three - ten minute burns at 2100 degrees Fahrenheit.
Always keep at least a 2-inch clearance between chimney pipe and any combustible materials.
AllFuel HST Vented 1/12 to 6/12 Pitch Roof Flashing for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe
ALLFUEL HST AllFuel 6 in. 1/12 to 6/12 Pitch Roof Flashing for Double Wall Chimney Pipe BL.EV.RB-SHT6RF01 - The Home Depot
1/12 to 6/12 Pitch Roof Flashing for 6 Inner Diameter Chimney Pipe – AllFuel HST
1st stove install, questions
All-Fuel Chimney - SuperVent
Multi Story Kit for 6 Chimney Pipe w/ Flat Top Chimney Cap - ComfortBilt
6 Chimney Pipe – AllFuel HST
The 1/12-6/12 roof flashing provides leak proof penetration of the roof. Our flashings can be used in both vented and fully sealed applications (including sealed chase installations). A storm collar, sold separately, is required to seal the flashing.
Allfuelhst Roof Flashing 1/12 to 6/12 for 6 Chimney Pipe
AllFuel HST Vented 1/12 to 6/12 Pitch Roof Flashing for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe
AllFuel HST Roof Support for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe
Cathedral Ceiling Kit for 6 Chimney Pipe with Spark Guard
Our through the wall kit should be used whenever venting through the ceiling is not an option or is not desired. Note: venting straight up through the ceiling is always recommended for the strongest possible draft. This kit includes all the components you need to connect the single wall stove pipe to Class-A double wall insulated pipe, pass through an exterior wall, make a 90 ° turn, and top off the installation with a chimney cap. To complete this kit purchase the lengths of 8 in.
Through The Wall Kit for 6 Chimney Pipe with Chimney Cap
6 Chimney Pipe – AllFuel HST
Through The Attic Kit for 6 Inner Diameter Chimney Pipe – Dominusheat
Supervent® 6 ID Class A Double Wall 6/12 - 12/12 Pitch Roof Flashing at Menards®