Universal 17 degree folding cone machined from Delrin. Use this tool with any brand of coin ring reduction dies to fold coins with holes from 1/4″ inch (0.25″) to 3/4″ inch (0.75&…
Universal 17 degree folding cone machined from Delrin.
Use this tool with any brand of coin ring reduction dies to fold coins with holes from 1/4 inch (0.25) to 3/4 inch (0.75).
This is a direct replica of our popular stainless steel cone made from detail protecting Delrin plastic.
Use this Delrin folding cone to help preserve the inner detail of coins when folding. Punched holes should be deburred and free of sharp edges before using your Delrin folding cone.
For coins that are not 99% silver, it's important to remember that Delrin cones should not be your primary folding cone.
Ringers should use a steel cone for the majority of the fold and then transition to the delrin cone for the last little bit where you would get the most metal to metal contact.
And remember to always anneal your coins during the folding process.
Use in your hydraulic press or arbor press. Not for use in ring sizing machines, due to tool height and the lack of clearance.
Coin Ring Tools:, Stainless steel folding cone machined from heat treated 17-4 stainless steel., Use this 17 degree folding cone with any brand of
17 Degree Folding Cone, Stainless Steel, 1/4 inch to 3/4 inch Hole Sizes Folding Range
Legacy Brand Coin Ring Tools:, Coin Ring reduction and folding die machined from heat treated and hardened 17-4 stainless steel. No more worrying
17 DEGREE Folding Die (0.70 x 0.80) for making coin rings Stainless Steel
17 Degree 1 1.1 1.2 1.3 Folding set cone dies coin ring fold
One Universal Folding/Reduction Die .9″ x 1.0″ @ 17 degrees – Coin
Delrin Folding Cone Set - Used for making coin rings
17 DEGREE Folding Cone,DELRIN, coin ring tools 1/4 inch to 3/4
One Universal Folding Reduction Die 1.3″ x 1.4″ @ 17 degrees
17 Folding Die
Ring Vise
17-degree MEGA Universal Folding Cone, Stainless Steel, for 1/4
One Universal Folding Reduction Die 1.3″ x 1.4″ @ 17 degrees
17 DEGREE Folding Cone, DELRIN, 1/4 Inch to 3/4 Inch Hole Sizes Folding Range
17 DEGREE Folding Cone, DELRIN, 1/4 Inch to 3/4 Inch Hole Sizes Folding Range
Size 17 Ring