Canfield 60/40 Solder 1LB Roll Stained Glass Supplies NOT

This Tools item by GlassCraftersGlass has 5 favorites from shoppers. Ships from Sarasota, FL. Listed on Oct 9, 2023
60% Tin / 40% Lead is a general purpose solder used in the soldering of copper and copper alloys and/or ferrous based alloys. The most popular of the tin/lead alloys for stained glass. Technical Data: Color: Gray/Silver Melting Range: 361° - 376° F (solid to liquid) Shear Strength: 5700 psi Tensile Strength: 6400 psi Use with adequate ventilation and proper personal protective equipment. See SDS for any specific emergency information. Do not dispose of any hazardous materials in non-approved containers.

Canfield 60/40 Wire Solder (50 lb. Box) - Franklin Art Glass

Solder – Weisser Glass Studio

Canfield Lead-Free Pewter Finish Solder - 1 Lb

Canfield Ultimate 63/37 Solder - 1 Lb.

60/40 Solder for Stained Glass, 1/8(3mm) Dia, 1 lb Spool, Supplied by ANOSON

Canfield 60/40 Solder 1LB Roll Stained Glass Supplies NOT

Solder for Stained Glass (60/40)

Solder – Weisser Glass Studio

ALLOY: Sn60% Pb/40%, Diameter 2.0 mm/0.08 inch No Rosin Flux inside (Need To Use With Flux) Lower Melting Point: 362℉/183℃, Flow Smoothly, Fast

Essmetuin Tin Lead Solder Wire(Sn60/Pb40) for Stained Glass/Crafts/Jewelry 183℃ Melting Point 2.0MM(0.08in) No Flux Solid Welding Solder (2LB)

Stained Glass Solder

Made in the USA 1Lb Spool using only Virgin Material 60/40 is 60% Tin and 40% Lead Melting Temperature of 360° - 376°F Contains One Spool WARNING: This product can expose you to lead, which is known to the state of California to cause birth defects or other reproductive harm.

Canfield 60/40 Solder for Stained Glass

Canfield 60/40 solder for stained glass

Sn60/Pb40 Tin Lead Solder Wire For Stained Glass 3.0mm Dia No Flux Welding Soldering Tin By Wonderway (16oz)

60/40 Solder, 1 lb roll – Stained Glass Stuff

Canfield 60/40 Wire Solder (50 lb. Box) - Franklin Art Glass