15-Color Alumilite Resin Dye Set, 1 oz. Each - Rockler

Set of 4 of my favorite Alumilite 1-ounce epoxy resin dyes – White, Black, Translucent Violet, and Translucent Ocean Blue. These are very concentrated

Set of Four Alumilite Epoxy Resin Dyes

Add vibrant colors to your epoxy creations with CastFX Liquid Colorants. Designed to work specifically with System Three products, CastFX is compatible with most epoxy systems. Be sure to pre-test to ensure results meet your expectations.

System Three CastFX Liquid Colorant - Chelan Green - 4 oz

These flexible silicone cups shed cured epoxy for easy reuse. If you don't have time to clean them immediately after your epoxy pour, simply let any residual epoxy cure and peel it off later by flexing the cup. The measuring cups are graduated in milliliters, cups and ounces for easy measuring and mixing of various types of epoxy resins. The sides are textured for a secure grip, and the material is translucent for easy viewing of your liquid levels.

Rockler 5-Piece Silicone Mixing Cup Set

These flexible silicone cups shed cured epoxy for easy reuse. If you don't have time to clean them immediately after your epoxy pour, simply let any residual epoxy cure and peel it off later by flexing the cup. The measuring cups are graduated in milliliters, cups and ounces for easy measuring and mixing of various types of epoxy resins. The sides are textured for a secure grip, and the material is translucent for easy viewing of your liquid levels.

Rockler 5-Piece Silicone Mixing Cup Set

These foam rollers feature the ideal 1/8'' thickness needed for an even coating of epoxy without runs or sags. Designed as epoxy rollers, they can also be used to spread water-based glues. Ideal for applying thin seal coats, coating and fiberglassing wood, and rolling epoxy barrier coats on fiberglass boats. Great for spreading over large surfaces without absorbing a lot of glue. Applies an approximately 3 mil coating. Use with a 3'' roller frame (sold separately).

System Three 3 Epoxy Roller Covers

Alumilite Dye

Alumilite Clear Slow Casting Resin - Rockler

In addition to wooden boat building, System Three is consistently used for applications like the repair of cracked concrete oil well linings in Alaska, lobster tank linings, pianos, guitars, and outside wooden signs and furniture. Resin and hardener are mixed in an easy 2:1 volume mixing ratio and may be mixed with fillers for better flow control and gap filling applications. Medium hardener refers to the speed at which the epoxy cures.

System Three Hardener #2, Quart

Alumilite Dye Liquid Color Tint Flo Red (1 oz) Highly Concentrated Colorant or Pigments for Casting Resin, Epoxy Coating & Urethane

Bottle Stopper Blank Resin Casting Mold, 2'' x 2'' x 3'' - Rockler

Alumilite Dye Liquid Color Tint Flo Red (1 oz) Highly Concentrated Colorant or Pigments for Casting Resin, Epoxy Coating & Urethane

When it comes to casting and encapsulating, it is essential that your resin is completely free of air bubbles, which are inevitably introduced as you pour. That's where the California Air Tools 5-gallon pressure pot clamps down to ensure top-quality results. Just pour the resin into your mold, set it inside, seal the lid and connect an air compressor (sold separately) with the included standard quick coupler.

Rockler California Air Tools 365CR 5-Gallon Pressure Pot for Casting

Alumilite Clear Slow Casting Resin - Rockler