Autofiber Appli-Coat Microfiber Ceramic Coating Applicator Pad

4.5

(525)

Write Review

$ 7.50

Add to Cart

Qty

In stock

Description

(3 in. x 1.5 in. x 1.5 in.) The [Appli-Coat] suede microfiber ceramic coating applicators were designed by professional detailers, for ease of use and application. Made from premium 80/20, lightweight (200gsm), suede microfiber, they absorb minimal product and allow for even application on paint, plastic and rubber tri
(3 in. x 1.5 in. x 1.5 in.) The [Appli-Coat] suede microfiber ceramic coating applicators were designed by professional detailers, for ease of use and application. Made from premium 80/20, lightweight (200gsm), suede microfiber, they absorb minimal product and allow for even application on paint, plastic and rubber trim. The edges of the sealer applicator pad are sewn inside of the sponge allowing for safe application on three smooth and soft sides. Just sprinkle a few drops of your preferred coating on one of the three flat surfaces of the suede applicator cloth and apply as directed the manufacturer. The microfiber ceramic coating applicator pads are good for one use, and should be discarded once all three sides have been used. Once the coating cures and hardens in the material, it can harden the fibers making them rough leading to potential scratching. We do not recommend laundering or cleaning the pads, because ceramic coatings are just too tough. We suggest using rubber gloves to prevent getting the coating on your hands and fingers. 6 pack 3x1.5x1.5 200 gsm 80% Polyester and 20% Polyamide - 100% Split Inside Sewn Seams Made in China

Automotive Ceramic Coating Products & Applicators

Adam's Microfiber Applicator Foam Pads are now the same Super Plush quality of our towels. The microfiber cleaning cloth is gentle, yet strong enough to withstand the test of time. This product was designed with the consumer in mind. You will notice a marked improvement in softness, function, and durability with our Adam's Microfiber Applicator Pads.