Cactus Juice Resin 3.79l, Stabilising Resin

4.5

(153)

Write Review

$ 49.99

Add to Cart

Qty

In stock

Description

Cactus Juice Stabilizing Resin is a premium, professional grade, heat cured resin. Use it for stabilizing and hardening wood and other porous materials. It is especially effective on those beautiful, punky, spalted woods that are just too soft to work with! Cactus Juice is easy to use and does not significantly change the colour of most woods. Cactus Juice is not toxic or flammable and is NOT solvent based and as a result, cures 99.99% from liquid to solid by weight, far superior to typical home stabilizing solutions such as Minwax Wood Hardener or polyurethane. Stop throwing away punky soft blanks and give Cactus Juice a try!
Cactus Juice - New Revised Formula! Cactus Juice Stabilizing Resin is a premium, professional grade, heat-cured resin for stabilising and hardening wood and other porous material. It's especially effective on those beautiful, spalted woods that are normally too soft to work with. Cactus Juice is easy to use and does not significantly change the colour of most woods. Cactus Juice is not toxic, nor flammable, and it is not solvent based! It cures 99.99% from liquid to solid by weight; far superior to typical home stabilising solutions. This is not an entirely new formula, just a revised one that will mix absolutely fine with your existing Cactus Juice. It still has the same curing temperature and vacuum time as the previous version, but with great new benefits such as virtually no foaming, 15% less bleed out and is as clear as water! Cactus Juice is produced in Texas, USA, by Curtis O. Seebeck from Turntex Woodworks (if you have spent any time on wood-turning online forums you might know him as MesquiteMan). No, no cactuses were harmed in the manufacturing. Cactus Juice will harden soft and spalty wood. Use it stabilise and harden wood - and other porous materials too. You can add colour using the Cactus Juice Stabilizing Dyes with no risk of the dye affecting the resin. *Please note with the revised formula, some settling may occur after mixing with the Bright Yellow, Coffee Brown and Lime Green Cactus Juice dyes.* You can also use some of Alumilite Resin Dyes. Please note, not all Alumilite Dyes are suitable, only use the following with Cactus Juice: Black, Blue, Brown, Green, Ocean Blue, Orange, Red, Violet and Yellow. Cactus Juice must be used in a high quality vacuum chamber, sold separately here. It is heat cured in an oven, at about 85°C-95°C. We recommend using a small convection oven. For health reasons, don't use your kitchen oven due to fumes.Before purchase, please read the full instructions on how to use Cactus Juice here. This size of Cactus Juice is shipped unactivated with the activator in a separate bottle. Activating is simple; just open the small bottle and add the contents into the large bottle. Replace the cap and shake well. If some of the activator particles do not dissolve, allow it to sit over night and shake again the next day. You must activate the entire bottle in one go. It is not recommended to activate portions of the bottle since it is difficult to properly proportion the activator. Once activated Cactus Juice has a shelf life of 8-12 months. Approximately 3.79 Litres (1 US Gallon). Also available in a smaller 1/2 US Gallon size here. CLICK HERE FOR AN EXCELLENT ARTICLE ON HOW TO USE CACTUS JUICE, FROM KURT HERZOG, IN WOOD WORKERS INSTITUTE MAGAZINE. Quick Start Basics for Use Prepare blanks - sand, etc Place blanks in vacuum chamber and weight down Add Cactus Juice to completely cover blanks Apply full vacuum to chamber and keep your vacuum pump running until bubbles stop Release vacuum and soak blanks for at least twice as long as you had them under vacuum Remove blanks Wrap in foil Cure at 190-200° F (87-93° C) until Cactus Juice has solidified Remove foil Allow to cool to room temperature Store your excess Juice for the next use (DO NOT STORE IN AN AIR TIGHT GLASS JAR!) Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask. Once activated, Cactus Juice must be kept below 29°C at all times otherwise it may cause rapid hardening. It is also recommended to keep the vacu…