Stronghold Tile Adhesive - Crown Paints Kenya PLC

4.6

(477)

Write Review

$ 1.00

Add to Cart

Qty

In stock

Description

A high-quality P.V.A adhesive designed to bond glazed, ceramic and vinyl asbestos tiles to wall […]
A high-quality P.V.A adhesive designed to bond glazed, ceramic and vinyl asbestos tiles to wall and floor areas. Can also be used for fixing expanded polystyrene ceiling tiles. Note: Not recommended for use with pure vinyl floor tiles. Characteristics: A unique formulation incorporating polyvinyl acetate as the binder that imparts the high adhering properties of the product. Advantages: Attractive appearance, quick-drying, high bonding power, easily cleaned with water as the solvent. Appearance: White viscous gel or suspension. Application: Use a comb trowel. Thinning & Mixing: Supplied ready for use. Thinning not necessary. Equipment Cleaner: Water. Pack Sizes: ½ Kg, 1 Kg, 4 Kg & 25 Kg Drying Time: 4 Hours Specification for use: Prepare the surface - Ensure that the surface is clean, dry, sound and free from grease or polish. Allow new concrete floor screeds and plaster to dry out. Apply a liberal coat of the adhesive (2-3mm thick) to the wall/floor surface using a comb trowel. Do not cover too large an area at any one time. Allow drying for approximately 1 minute. Bring tile and substrate into contact & press firmly into position. Note: Where the ceramic tiles are to be permanently submerged in water e.g. in swimming pools, use Neoprene contact adhesive. Other Directions: Store in a cool dry place. For health & safety information, please refer to our Material Safety Data Sheet (MSDS)