Duravent

Use for vertical terminations only. Provides improved performance in high wind conditions. For vertical terminations only. Available in aluminum.

DuraVent 58DVA-VCH 5 x 8 DirectVent Pro High-Wind Termination Cap

Features, 6- Inch inside diameter / 8- Inch outside diameter, 2- Inch clearance to combustibles to the pipe, StainleStainless Steel inner pipe

DuraVent 6 - Inch Diameter Duratech Chimney Components

The DuraPlus 6 Class-A 30 Deg Elbow Kit from the DuraPlus Series which includes (2) elbows and one Elbow Strap. is used for offsets around obstructions such as rafters, ridgepoles, or joists. May have two pairs of elbows, if needed. Offsets greater than 30 Deg are not permitted in accordance to UL 103 standards. Elbows swivel 360 Deg at base (angles are not adjustable). A pair of elbows is required to return an offset chimney back to vertical.

DuraVent 6DP-E30 DuraPlus 6 in. 30-Degree Elbow Kit

Stainless steel inner wall, Aluminized steel outer wall. Component that is used in a typical venting installation. Mostly use with DuraVent factory-built chimneys. Improves stove performance by maintaining high flue gas temperatures for a steady draft. Double wall/insulated design that offers reliability for long term use. Offsets obstructions as needed with an adjustable elbow angle. Stainless steel inner wall, Aluminized steel outer wall.

DuraVent 6DVL-E45 DVL 6 Double Wall Black Elbow - 45 Degree

Home - DuraVent

Designed for appliances tested and listed for direct vent. Features a fully unitized twist-lock construction in both 4” x 6 ⅝” and 5” x 8” vent sizes. Use of sealant is optional, unless specified by the appliance manufacturer. To calculate install length, subtract 1½” for each joint. No beads or hems. Black pipe lengths feature exterior laser-welded seams.

DuraVent 58DVA-06 5x 8 DirectVent Pro 6 Pipe Length (Galvanized)

DURAVENT DVL DOUBLE WALL- 6 Wood Stove Pipe- 12 Pipe Length

DuraVent 58DVA-IS 5 x 8 DirectVent Pro Attic Insulation Shield

DuraVent 2PPS-12C PolyPro - 2-Inch Diameter - Straight Pipe Length

DuraVent 4'' Diameter Type B Gas Vent Aluminum High-Wind Cap

Overview For an economical, drip-free, single-wall stovepipe, DuraBlack is an excellent choice. Built to DuraVent’s high standards, DuraBlack is constructed with die-formed end fittings. Adjustable lengths eliminate the need for cutting and crimping. Available in 24 gauge painted steel, or 22 gauge stainless steel.

DuraVent 8 x 48 DuraBlack Stainless Steel Single-Wall Pipe - 8DBK-48SS