PC-Marine - 2oz - Putty Epoxies – Western Log Home Supply

4.6

(766)

Write Review

$ 3.50

Add to Cart

Qty

In stock

Description

PC-Marine - 2oz Putty Epoxies Download PC-Marine MSDS Description: PC-Marine is a hand moldable putty epoxy designed for quick emergency-type
Buy quality log home supplies online from Western Log Home Supply. We carry log cabin supplies including chinking, caulking, and wood stain finishes. Find log home care and maintenance supplies online from Western Log Home Supply.
Download PC-Marine™ MSDSDescription: PC-Marine™ is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Marine™ is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. Cut, mix and apply. PC-Marine™ allows a working time of about 15 minutes and cures for service in 60 minutes. Repair: Holes in Fiberglass, PVC, Boats, Spas, Swimming Pools and more. ***Note: PC-Marine™ will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt.Mixing: Cut or twist off desired amount of epoxy. Mix by kneading putty with fingers until a uniform color is achieved. For ease of mixing warm putty to room temperature or above. Powder on hands (corn starch, baby powder) is helpful to minimize sticky epoxy contact before hardening begins.*** Note: Use latex gloves to avoid any issues.Tips: For best results, surface should be cleaned and free of rust, dust, and oil. Solvents such as denatured alcohol can be used to remove most contaminants. Whenever possible, lightly sand or rough up the surface to improve adhesion. For a smooth, finished surface, hand rub with wet finger or cloth prior to cure. Denatured alcohol is excellent for smoothing, shaping, and forming of putty epoxy. PC Marine™ cures well even at cold temperatures (40°F). PC Marine™ is supplied in premeasured sticks. The texture of the putty is such that it is slightly tacky but does not stick aggressively to fingers. The putty holds its shape well and can be used in vertical and overhead applications.Packaging: Wrapped in Polyethylene film and protected on the ends with aluminum labels, the stick is doubly protected in an air tight clear plastic cylinder. The remaining portion of unused putty can be saved by placing the aluminum labels on the exposed end and put back into the cylinder.

PC-11 was formulated as a true marine epoxy allowing users to bond to wet dry and fully submerged substrates. PC-11 formulation provides extended working time for large and critical jobs which allows the user to reposition work or make changes. High wet grab or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids caustics detergents gasoline fuel oil salt and fresh water.

PC-11 White Epoxy Paste - 8 oz can

PC-Marine is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Marine is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. Cut, mix and apply. PC-Marine allows a working time of about 15 minutes and cures for service in 60 minutes. PC-Marine will not bond to wax paper, Teflon, polyethylene, and some other plastics. There are hundreds of uses in thousands of combination.

PC Products 2 oz. PC-Marine Epoxy Putty, 3-Pack

Marine Epoxy Putty

PC-Products PC-Marine 2oz

PC Products PC-Marine Multiple Colors/Finishes Epoxy Adhesive at

PC-Lumber is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Lumber is formulated with real wood. Cut, mix and apply. PC-Lumber allows a working time of about 15 minutes and cures for service in 60 minutes. PC- lumber will not bond to wax paper, Teflon, polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Use to reform missing wood and bond wooden furniture, frames, moldings, screw holes, handles, knot holes and more.