Crystalac Extreme Protection Polyurethane 8oz Matte Satin Gloss

(782)

Write Review

$ 10.00

Add to Cart

Qty

In stock

Description

This Paint item by WildOrchidDIY has 30 favorites from shoppers. Ships from Branchville, NJ. Listed on Jan 9, 2024
CrystaLac Extreme Protection Polyurethane is an interior NON-YELLOWING, Environmentally Safe Top Coat that is Super Hard, Super Clear and Super Easy to Use. It is Scratch, Chemical, and Water Resistant. It Self-Levels, has Low Odor, Low V.O.C. and cleans up easily with water. Use anywhere an extra level of protection is needed. Added UV stabilizers will keep dyes and stains brilliant and will help protect colors from fading. Dries crystal clear even over white finishes. Excellent for use as a chalk paint sealer. CrystaLac Polyurethane can be applied by either brushing or spraying. Use a good quality brush. It is not necessary to sand between each Top Coat. All CrystaLac Top Coats will bond to the prior coat. CrystaLac Top Coats can be used over thoroughly dried oil or water-based stains, shellac, lacquer, Polyurethane or Acrylic. If recoating over an old finish, scuff sand first and remove any surface contaminants such as dirt, waxes or polishes. Usually 3 to 5 coats are sufficient to produce a beautiful, protective finish. Use more if desired. Coverage is approximately 400 to 500 sq. ft. per gallon. Dry time is usually 30 min to 1 hour. Allow 2 to 4 hours before recoating. Do Not freeze. Do Not apply below 60 degrees. Do Not thin or clean with lacquer solvents or mineral spirits. Use soap and water for clean-up.