Fibre Glast Parting Wax - 7 lb. Tin

Parting wax is a non-silicone green wax specially formulated to produce a tough, durable, high-gloss surface. When used with #13 PVA, Partall parting wax delivers excellent release characteristics. Special preparation is required when using on a new mold:Use a clean dry cloth or applicator pad to apply a thin even coat of Parting Wax to mold surface. If buffing by hand, apply to small section and begin buffing within one minute of application.

Sea Hawk Islands 77 Plus was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environments.

Sea Hawk Islands 77 Plus Ablative Antifouling Paint

Plug Construction Guide - Learning Center

Candle Tin - Direct Print

Expressions LTD Polytek Platsil 73-15 Silicone Mold Rubber

Moulding Plaster - The Compleat Sculptor

Fiberglass Mold Release - Fiberglass Warehouse

Patterned Carbon Fiber Fabric, Roswell Pattern

Partall Paste Wax #2 in stock. Excellent mold release - Fibre Glast

Seggsy Time Rose Scented Candle 8 Oz Soy Candle Black Tin

Interlux Micron CSC is one of the most effective copper-based antifouling paints ever developed for both powerboats and sailboats. Micron CSC can be

Interlux Micron CSC Ablative Antifouling Paint

AMOTIE 15 Packs 7oz Candle Jars for Making Candles

Styrene Wax in stock for same day shipping

Add Styrene Wax to non-waxed polyester resin and gel coat to prevent the prolonged tackiness associated with thin sections of polyesters in your composite. This Styrene Wax is a 5% paraffin dissolved in styrene. When paraffin is added to resin, the wax will rise to the surface and protect the curing resin from the inhibiting action of the air. Once the resin is fully cured, it must be sanded off before any additional applications.

Fibre Glast Styrene Wax - Quart (2 lbs)

Styrene Wax in stock for same day shipping