ESSMO™ Red Glitter Sparkle Heat Transfer Vinyl HTV DG06 – EzAuto Wrap

Material Specification: PU Composition Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure sensitive backing Glitter Finish Application Instruction (Home Iron) Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Place o

Material Specification:

• PU Composition
• Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness)
• Heat pressure sensitive backing
• Glitter Finish

Application Instruction (Home Iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

• Cut in reverse
• Weed excess material
• Preheat all fabric prior to pressing for best results
• Apply design at 305°F/150°C-160°C for 12-15 seconds
• let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

• 100% Cotton
• Poly / Cotton Blends
• 100% Polyester
• Leather

Laundering:

• Wait 24 hours before 1st wash
• Machine wash warm or cold / mild detergent (Max 60°C)
• Dry on normal dryer setting
• Do not bleach or dry clean

Note: Material will be rolled for shipment. Due to the nature of the material, wrinkles might appear after unroll. In this case, peel off the transfer tape (clear film) and re-apply transfer tape onto the film with heavy flat item on top such as yellow page for 15 minutes, the film will be back to the flat shape.

Chrome Glitter Red Vinyl Wrap – EzAuto Wrap

Gloss Diamond Glitter Red Vinyl Wrap – EzAuto Wrap

EZAUTOWRAP Gloss Glitter Red Metallic Sparkle Car Vinyl Wrap Sticker Decal - 4X8 (10cm x 20cm) Sample : Automotive

Material Specification: PU Composition Thickness:230 Microns / 9.8 Mils (Please make sure plotter is capable of cutting such thickness) Heat pressure

ESSMO™ Rainbow White Glitter Sparkle Heat Transfer Vinyl HTV DG21

ESSMO™ Red Glitter Sparkle Heat Transfer Vinyl HTV DG06 – EzAuto Wrap

Siser Glitter HTV 20 x 12 Sheet - Iron on Heat Transfer Vinyl (Red) : Arts, Crafts & Sewing

Chrome Glitter Red Vinyl Wrap – EzAuto Wrap

Free Tool Kit EZAUTOWRAP Sky Blue Matte Glitter Car Vinyl Wrap Sticker Decal Sheet Bubble Free - 60X600 (5FT X 50FT) : Automotive

Matte Glitter Silver Vinyl Wrap – EzAuto Wrap

Free Tool Kit EZAUTOWRAP Black Matte Glitter Car Vinyl Wrap Sticker Decal Sheet Bubble Free - 24X60 (2FT X 5FT) : Automotive

ESSMO™ Red Glitter Sparkle Heat Transfer Vinyl HTV DG06 – EzAuto Wrap