Gtechniq Crystal Serum Light, 50 ml
Crystal Serum Light forms a high-gloss, slick to the touch, chemically bonding inorganic layer of 9h optically clear ceramic paint coating. Offering the best swirl mark and chemical resistance available in a prosumer product. Price: $99.00. Brand: Gtechniq. Size: 30 ml. Manufacturer Part #: CSL 0.05.
- The best possible swirl mark and chemical resistance from a prosumer grade product.
- Forms a high-gloss, slick-to-the-touch, chemically bonding inorganic layer of 9h optically clear ceramic.
- Resistant to chemicals pH2 - pH12.
- 3 - 5 years durability
- To apply Serum Light, your vehicle must be indoors and it must remain indoors for at least 12 hours after application.
- Ambient working conditions must be above 38°F and below 77°F.
- Properly wash, decontaminate, then polish your paintwork to remove any bonded contaminants and paint defects.
- The most important stepafter getting your surface ready for application, thoroughly wipe down all the surfaces to be coated with Gtechniq Panel Wipe. Make sure to use a new, clean, dry microfiber towel for this step.
- Use the gloves proved to prevent Serum Light from coming into contact with your skin.
- Soak the included application pad with two full measure from the pipette and work the Serum Light into the applicator to get an even application.
- Replace the lid on the bottle and set aside - do not keep the bottle in your hand as this promotes premature curing.
- Apply Serum Light in overlapping strokes to a small panel or half a larger panel.
- After coating the section you are working on, begin to remove any residue with a clean, dry microfiber towel. Always remove from further than you have applied, working from the outside in. It is essential to check for residue.
- You may need to buff the same section several times to remove residue. It is recommended you have two microfiber towels at your disposal for residue removal.
- When removing residue, have a bright, but diffues light source is recommended for spotting coating residue.
- Do not buff with too much force as this can spoil the surface your are protecting.
- Take care that the microfiber towels you are using are rotated sufficiently and quickly so that Serum Light does not partially cure in the towel.
- If you miss removing residue and it cures fully, you should re-polish this area and reapply Serum Light.
- Use Serum Light within 1 year of purchasing and once opened, use within 3 months.
- Store opened bottles in a dry and cool storage area that is out of direct sunlight.
GTechniq EXO v5 and CSL Kit Kit
Gtechniq Crystal Serum Light, Ceramic Paint Coating
Gtechniq Crystal Serum Light, 50ml
Gtechniq Crystal Serum Light Ceramic Coating for Cars, Protect Car Paintwork, High Shine, Easy to Apply, 50ml (Sufficient for 1 Med-Large Car)-3-5 Years Durability : : Beauty
Gtechniq Crystal Serum Light Csl 5 Year Ceramic Coating – The Detail Store
Gtechniq EXO v5 Ultra Durable Hydrophobic Coating – Status Detail
Gtechniq Crystal Serum Light + EXO
First experiences of Gtechniq coating
Gtechniq Crystal Serum Light CSL is a high quality coatings that will add an unbelievable amount of gloss depth and protection. It is so strong that right after you apply it you can't remove it with traditional polishes you would need to wetsand it. CSL was designed from the same DNA as the incredibly popular but professional only Gtechniq Crystal Serum.
Gtechniq Crystal Serum Light Ceramic Coating - 30 ml
Crystal Serum Light Flyer - Gtechniq USA
Gtechniq Crystal Serum Light 50ml Exo 50ml - Niska cena na
