Jewelry Soldering Kit Flux Ceramic Silver Solder Board Third Hand

This Hand Torches item by JetsInc has 284 favorites from shoppers. Ships from Sun Valley, CA. Listed on 20 Dec, 2023
8 PIECE SET JETS KIT Product # 1020-400712 1. SOLDERING BOARD CERAMIC PLATE HEAT RESISTANT 5" x 5" SQUARE BLOCK JETS Product# 1922-4055 Made in USA SPECIFICATIONS: - Dimensions: 5" x 5" x 1/2" Thick (120mm x120mm x 12.7mm) - Temperature Tolerance: Up to 2000ºF / 950ºC. - Reflects Heat - Ceramic (Non-Asbestos) - Board Weight: 14oz. 2. SOLDERING PICK TITANIUM TIP NON ROLL HANDLE JETS Product # 1919-950 G (Handle Color may Vary) SPECIFICATIONS: - Overall Length: 6-1/2" - 165mm - Pick Length: 2" - 53mm - Handle: Non Rolling Handle NOTE (Hex End Head -Color may vary) - Weight: 0.6oz. - 16gr 3. THIRD HAND BASE HELPING HAND BASE ONLY TWEEZER TOOL HOLDER 3RD HAND BENCH WORK JETS Product # 1418-101 SPECIFICATIONS: - Base Material: Cast Iron - Base Diameter: 2-1316" - 71.5mm - Base Weight: 12.2oz 4. FIBER GRIP TWEEZERS CROSS LOCKING SELF CLOSING BENT TIP JETS Product # 1419-5018 SPECIFICATIONS: - Overall length: 6-1/2” - Tweezer Tip: Bent 45o - Serrated - Weight: 2 oz 5. CROSS LOCK TWEEZER SHORT POINTED SELF CLOSING REVERSE ACTION JETS Product # 1419-5001 SPECIFICATIONS: - Overall length: 4-3/4” - Tweezer Tip: Pointed - Serrated - Weight: 2 oz 6. HANDY FLUX™ - Paste Made by Lucas Milhaupt 7oz. JETS Product # 1924-407 All purpose, low temperature flux Handy® Flux is a long lasting white paste type, very durable won’t break down from prolonged heat, an all-purpose flux for use in brazing and soldering Gold, Silver, Brass, Copper and other Non-Ferrous Metals. Flux is for torch brazing - NOT soldering iron. Handy Flux is an active fluoride/borate-type flux which is appropriate for all nonferrous metals and begins to melt and dissolve oxides at 600°F, having an effective temperature range from1100° F-1600° F. Paste formula can be cleaned up with hot water.Handy FluxTM is widely used in Jewelry Making, by Silversmiths, and in Creative Arts. Prior to soldering make sure joints and the solder are clean, flux the full surface area to prevent oxidation and allow for good solder flow, and a good brazed joint. Soldering Note: Clean - Surface & Joint is important and not too much Solder, good even heat over entire joint area. Clean remove oxides and other soldering residues prior to finishing. 7. WIRE Solders Diameters 20ga - 0.032" - 0.81mm / Lengths: 12" JETS Product # 1925-45331 SOFT/EASY SPECIFICATIONS: - Solder: Silver Content of 65% - Melt temperature: 1,240°F - 671°C - Flow temperature: 1,325°F - 718°C MEDIUM SPECIFICATIONS: - - Solder: Silver Content of 70% - Melt temperature: 1,275°F - 691°C - Flow temperature: 1,360°F - 738°C HARD SPECIFICATIONS: - - Solder: Silver Content of 75% - Melt temperature: 1,365°F - 741°C - Flow temperature: 1,450°F - 788°C 8. SHEET Solders Measure: 1" x 1" Square - Weight 1Dwt – 1.5Gr JETS Product # 1925-45223 SOFT/EASY SPECIFICATIONS: - Solder: Silver Content of 65% - Melt temperature: 1260o F - 682oC - Flow temperature: 1,325°F - 718°C MEDIUM SPECIFICATIONS: - - Solder: Silver Content of 70% - Melt temperature: 1,295°F - 746°C - Flow temperature: 1,360°F - 738°C HARD SPECIFICATIONS: - - Solder: Silver Content of 75% - Melt temperature: 1,375°F - 746°C - Flow temperature: 1,450°F - 788°C

Soldering Kit for Jewelry Making Handy Flux 3rd Hand Base Fiber Grip Tweezers Silver Wire and Sheet Ceramic Board Soldering Pick, Women's, Size: One

Jewelry Soldering Kit Smith Little Torch Set Complete Tools

Solder Third Hand

Cast Iron Ingot Mold 50 Gram Open Cavity Machined Pocket Gold & Silver Bars

Soldering Kit/Tweezers/ceramic board/ Third Hand/pick/Jewelry making kit

Jewelry Crafts Soldering Tools Kit Ceramic Solder Board Third Hand Pick Tweezers

Equipment Needed for Soldering Jewelry - RioGrande

2 Lb. Stainless Steel Tumbling Media Shot Jewelers Mix 4 Shapes Tumbler Finishing 2.5 FRE

Standard Jewelry Soldering Kit With Silver Solder Wire KIT-1750

This can be used for joining silver nickel and copper alloys. This solder flux paste kit is made from 98 percent tin and 2 percent silver. It has a melting point of 450 degree Fahrenheit and can be used for non-electrical applications. It contains 0.75 Oz. of solder and 25 Oz. of flux.

Alpha Fry Am53982 Lead Free Silver Solder

Handy Flux Paste 7 Oz Jar W/ Brush Cap - Silver Soldering Brazing Jewelry Making

Essential Jewellery Soldering Kit Jewellery Supplies - Pod Jewellery

Honeycomb Ceramic Soldering Block ⋆ Keepsaker Supplies

Third Hand Soldering