WOD Kapton Tape 2 Mil, Ships Today - Multiple Sizes - Tape Providers

Polyimide Film Tape is a 2 mil electrical grade coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. Available in Multiple Sizes.
Kapton Polyimide Film TapesProduct DescriptionWOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.WOD PKT2 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT2 overcomes this problem without any of the typical drawbacks of conventional "anti-static" or "static-free" tapes (e.g., variable adhesion and opaqueness).Product ApplicationsPrimarily used in electrical insulation and gold finger protection.Protects gold tabs in circuit boards during soldering.Protects surfaces helping reduce replacement partsUsed in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.electrical insulation applications this product does meet class H requirementsTechnical PropertiesAdhesive: High performance siliconeCarrier/Backing: Electrical grade polyimide filmThickness: 3.5 mils (carrier, adhesive)Adhesion: 27.4 ounces per inch (to stainless steel test panel)Tensile Strength: > 36.5 pounds per inch (longitudinal)Dielectric Strength: > 8,000 voltsElongation: > 70%Service/Operating Temperature: up to 392°FSpecification Met: MIL-P-46112B; UL510 approved for flame retardanceCore: 3" DiameterAdditional InformationAlternative to: Electro Tape 95-2; Ideal 9322; T&F 3903; American 304-2; Anchor K-350; Permacel P-222; Taconic 6325-02; Berry Plastics 2345-2; Tesa 4429; Dewal 303-2.Note: Specifications are those given by manufacturers and are not tested for accuracy.

Kapton Polyimide Film Tapes

Product Description

WOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.

WOD PKT2 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.

The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT2 overcomes this problem without any of the typical drawbacks of conventional anti-static or static-free tapes (e.g., variable adhesion and opaqueness).

Product Applications

• Primarily used in electrical insulation and gold finger protection.
• Protects gold tabs in circuit boards during soldering.
• Protects surfaces helping reduce replacement parts
• Used in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.
• electrical insulation applications this product does meet class H requirements

Technical Properties

• Adhesive: High performance silicone
• Carrier/Backing: Electrical grade polyimide film
• Thickness: 3.5 mils (carrier, adhesive)
• Adhesion: 27.4 ounces per inch (to stainless steel test panel)
• Tensile Strength: > 36.5 pounds per inch (longitudinal)
• Dielectric Strength: > 8,000 volts
• Elongation: > 70%
• Service/Operating Temperature: up to 392°F
• Specification Met: MIL-P-46112B; UL510 approved for flame retardance
• Core: 3 Diameter

Additional Information

Alternative to: Electro Tape 95-2; Ideal 9322; T&F 3903; American 304-2; Anchor K-350; Permacel P-222; Taconic 6325-02; Berry Plastics 2345-2; Tesa 4429; Dewal 303-2.

Note: Specifications are those given by manufacturers and are not tested for accuracy.

The WOD Clear Tissue Tape is designed to serve a wide variety of arts and crafts applications. Both sides of the tape are layered with non-woven tissue and highly sticky clear glue. This hand-tearable tape features an excellent adhesive that maintains a strong hold on most surfaces, including metals, papers, paints, glass, plastics, and fabrics! The Tissue Tape is acid-free and heat-resistant.

Wod Tape Double Sided Tissue Craft Adhesive Tape 1/2 in. x 55 yd. Gift Wrap, Size: 1/2 inch, Clear

WOD Electrical Tape is a 19mm wide Plasticized PVC film with an aggressive rubber-based adhesive in OSHA colors; rolls are individually cello-wrapped and labeled. It is a UL/CSA 1.5 in. listed core. Flame retardant and cold resistant! Whether you are re-wiring, installing, splicing your home electrics, working on electrical projects, or just choosing a creative, economical way to decorate your home, office, or car.

Wod El-766aw Professional Grade Electrical Tape General Purpose Black UL/CSA Listed Core: 1.5 inch x 66 ft - Use at No More Than 600V & 176F

Acrylic Carton Sealing Tape is the most popular type of packaging tape on the market. With a strong adhesion to surfaces, this economical tape offers a secure seal to packages. Add a tape dispenser to increase productivity and reduce wastage. Acrylic tapes are fairly resistant to UV light – meaning they will not yellow as fast in storage areas.

24 Roll / Case Brown Tan Acrylic Packing Tape Shipping 2 Mil 3-Inch x 110 Yards

Polyimide Tape 2 Mil - Kapton Alternative (70002) - Tape Depot

Kapton Polyimide Film TapesProduct DescriptionWOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film

WOD Kapton Tape 2 Mil, Silicone Adhesive - 36 yards, High Temp. Resistant for Masking and Soldering, No Residue, PKT2

CGS, 2 Mil Dupont Kapton® Tape. High Temperature Heat Tape, UL 510

Kapton Polyimide Film TapesProduct DescriptionWOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film

WOD Kapton Tape 2 Mil, Silicone Adhesive - 36 yards, High Temp. Resistant for Masking and Soldering, No Residue, PKT2

Tapes Master - 2 x 36 Yds - 1 Mil Kapton Tape – Polyimide High

High Quality Produce Bag Sealing TapeWOD UPVC-24BS High Quality Bag Sealing Tape is 2.4 mil (35-micron film); Is used to seal polyethylene and other

WOD UPVC-24BS Rainbow Produce Poly Bag Sealing Tape (Available in Multiple Colors): 1/2 in. x 180 yds. (Pack of 3)

Tapes Master 2 Rolls - 1/2 x 36 Yds Polyimide High Temperature

Kapton Tape - 2 mil, 1 x 36 yds, Black - S-17214

When your reputation is on the line, you use the tools that bring out your best work. Available in multiple fade-resistant colors, Scotch vinyl Electrical Tape 35 helps you keep things color coded and organized on the job. Stretchy construction conforms to almost any shape. Excellent adhesion stands up to abrasion and weather, for a solid application that lasts.

Scotch Vinyl Electrical Tape - Pink - 1 Each

【Kapton Tapes】 Made with DuPont HN Kapton films and high temperature silicone adhesive. 【High Temperature】 Able to withstand extreme temperatures ,

CGS, 2 Mil Dupont Kapton® Tape. High Temperature Heat Tape, UL 510 Flame Retardant, Clean Removal. 0.25 x 36 Yards

PSBM Packing Tape, 2 Inch x 110 Yards, 36 Pack, Brown