PARTALL® Paste Wax #2

This wax is primarily used in pattern-mold making and on the edges of production molds. A very effective release on a variety of substrates. A must

PARTALL® Paste #2 Mold Release Wax -12oz can : Arts

Vacuum Bagging a Skimboard at MITES Competition - Epoxyworks

Parting wax is a non-silicone green wax specially formulated to produce a tough, durable, high-gloss surface. When used with #13 PVA, Partall parting wax delivers excellent release characteristics. Special preparation is required when using on a new mold:Use a clean dry cloth or applicator pad to apply a thin even coat of Parting Wax to mold surface. If buffing by hand, apply to small section and begin buffing within one minute of application.

Fibre Glast Parting Wax - 7 lb. Tin

Rexco Partall Paste #2 Mold Release Wax -12 oz can

What you can do if you don't want epoxy to stick - Epoxyworks

How To: Make a carbon fiber exhaust bracket (or any small CF part)

PartAll Paste #2 Paste Wax Release – brickintheyard

Rexco Partall Paste #2 Mold Release Wax -12 oz can

PARTALL Paste #2 may also be employed as an inexpensive edge wax on larger molds and may be used to seal rough wood molds or plugs for casting

PARTALL® Paste #2 Mold Release Wax -12oz can