Penetrating Guitar Finishing Oil

Penetrating Guitar Finishing Oil

4.5
(605)
Write Review
More
$ 6.99
Add to Cart
In stock
Description

This is the perfect product to give your guitar a natural-looking finish.   This oil can give a matte or gloss finish depending on the number of applications.  It penetrates the wood well, dries quickly, is water-resistant, and will not change colour or crack with age. Directions for Use: Apply the initial coat to finely sanded wood, at least, 240 grit.  Apply with a brush, soft cloth, or rub in with 1200 grit wet and dry paper.  Leave to cure for 5 to 10 minutes, or until sticky.  Rub off the excess with a clean cloth and leave to cure completely before applying the next coat. I find that the best result is  achieved rubbing the oil in with 1200 grit wet and dry paper and then wiping away all the excess until you have a finish that is dry
This is the perfect product to give your guitar a natural-looking finish.   This oil can give a matte or gloss finish depending on the number of applications.  It penetrates the wood well, dries quickly, is water-resistant, and will not change colour or crack with age. Directions for Use: Apply the initial coat to finely sanded wood, at least, 240 grit.  Apply with a brush, soft cloth, or rub in with 1200 grit wet and dry paper.  Leave to cure for 5 to 10 minutes, or until sticky.  Rub off the excess with a clean cloth and leave to cure completely before applying the next coat. I find that the best result is  achieved rubbing the oil in with 1200 grit wet and dry paper and then wiping away all the excess until you have a finish that is dry to the touch.  A few coats like this followed by, if you fancy, some wax.  I like heating up the cloth I apply wax with so it goes easier.  You shouldn't need to key the surface before applying more coats but if you want to just rub back a little bit with more 1200 grit wet and dry using a little of the oil as a lubricant. - Ben Crowe Safety -  This oil is a flammable liquid and vapour (H226) It contains White Spirit (D40) and ETHYL METHYL KETOXIME.  Keep away from heat, sparks, open flames, and other ignition sources.  Please do not smoke around this product. Keep the container tightly closed when not in use.  This product should have a long life if stored correctly in the original bottle and kept in a cool dry place out of direct sunlight. (P402+P235) Store and use in a well-ventilated area. Dispose of any cloths you use into a bucket of water, if allowed to dry these cloths will become highly flammable.  (P501) Dispose of contents/container in accordance with national regulations. Oil may be fatal if swallowed and enters airways. (H304)  If swallowed, IMMEDIATELY call a POISON CENTER/ doctor. (P310 + P310) Do NOT induce vomiting (P331) Please wear protective gloves/clothing.  (P303+P361+P353)  If you get this product on your skin (or hair), remove the contaminated clothing immediately and rinse with clean water. Complete Safety Data Sheet available on request. Email: shop@ Check out our  channel for more videos on how to get the most out of your Crimson Guitars precision hand tools as well as a myriad of guitar building tutorials and demo videos. We ship worldwide - no exceptions!

Stains & Dyes ~ Luthiery Laboratories

Musicmaster Transformation

Blog – Garageland

Stains, Penetrating Oils, etc

Using Oil To Finish a Stained Guitar (Crimson Guitars Guitar

Original Formula Polymerized Tung Oil — Sutherland Welles Ltd.

Is there any way to 'harden' soft wood like obeche with oil or

Staining a Guitar With Crimson Guitars Stains and Oils - Burst Effect

Prepping the body-The Neck: Buffing the fretboard, frets, neck

Kiesel Guitars - What's your go to neck wood? This one is a

Fretboard Cleaner and Restorative - 50ml Bottles

Imgur: The magic of the Internet

Fender PJ Bass “Natural” – Oiling an alder guitar body – Garageland

Shop Tour VI ~ Finishing

Natural – Satin finish – Finishing – Guitar Making Community