1/8 MDF - **NOT SHINY** - Perfect for lasers/Glowforge – Laser Wood Supplies

Smooth 1/8" MDF. Paints well with minimal effort.  Does not require sanding.  Boards are cut 11 3/4" x 19" by hand. There may be slight variations but will be very close to the size listed. We have been using this wood for about 3 years and have been very happy with the results.  This wood is great for all your craftin
Smooth 1/8 MDF. Paints well with minimal effort.  Does not require sanding.  Boards are cut 11 3/4 x 19 by hand. There may be slight variations but will be very close to the size listed. We have been using this wood for about 3 years and have been very happy with the results.  This wood is great for all your crafting needs: Glowforge, Hobby Laser, Wood burning, CNC machine, Sign Making, etc. This MDF is NAF (No Added Formaldehyde), ULEF rated.RECOMMENDED SETTINGS: Proofgrade Medium Draftboard. This is a good starting point but may need to be adjusted to your specific machine/conditions.***  **************** All Continental US and non PO Box orders are shipped via UPS Ground.  Shipping rates are as follows: MDF/WHITE MDF/BLK MDF/BALTIC BIRCH Medium Box  $18 ---- 1-12 sheets Large Box  $24 ---- 13-25 sheets XL Box $32 ---- 26-50 sheets ALL OTHER 1/8 MATERIAL, EXCEPT FOR POPLAR Medium Box  $18 ---- 1-10 sheets Large Box  $24 ---- 11-20 sheets XL Box $32 ---- 21-40 sheets

Smokey Hill Design 1/8 MDF Settings? - Beyond the Manual

An order for (20) 1/8” MDF sheets with a white melamine finish on one side (Not dry eraser board). Smooth matte white with back side regular beige

1/8” White MDF - Box of 20 Sheets - Glowforge Ready - Laser Cut Materials, Engraving, CNC, Woodworking, Crafting & Farmhouse Signs

High Grade MDF Boards for Laser Cutters - 1/4 inch – Kim & Garrett

1.5x20, 1/8 MDF Strips, X138, Glowforge, Laser Cutter, MDF Jewelry

High Grade MDF Boards for Laser Cutters - 1/4 inch – Kim & Garrett

Proofgrade Plywood: Maple, Cherry, and Walnut Roll Stamp Box

UNFINISHED 1/8 WALNUT PLYWOOD WITH AN MDF CORE. ***DOUBLE SIDED***. ***COMES IN EITHER 10 OR 20 SHEETS PER BOX*** Boards are cut 11 3/4 by 19 by

1/8 Walnut Plywood sheets perfect for Glowforge/Laser Cutting

All Materials – Glowforge Shop

MDF, 1/8 3mm

12 x 20 sheets of 1/8 MDF (24 sheets) perfect for

All Materials – Glowforge Shop

10 Boards of 12”x 19”, 6mm 1/4th inch MDF (Medium