NON-ADHESIVE PHENOLIC BACK 3D LAMINATE (THERMOFOIL) VENEER SHEETS Cabinet Doors 'N' More now offers 48" W x 96" H 3D Laminate Thermofoil Veneer Sheets with a non-adhesive phenolic back. This is a great option for cabinet refacing and can be used on cabinet face frames and end panels. This is same type of thermofoil material we use for our cabinet doors and drawers and is available in four finishes: White, High Gloss White, Antique White, Stone Grey and Smoke Grey. They will match perfectly! The non-adhesive phenolic backing provides a barrier between the thermofoil and the glue. We recommend contact cement to be used for product application. 3D Laminate is for inside use only and do not recommend use for outside applications. Phenolic Backer Thickness: .55mm (1/32 + or -) Thermofoil Thickness: 1/16 to 1/32 depending on the color Most
Cabinet Doors 'N' More now offers 48 inch W x 96 inch H 3D Laminate Thermofoil Veneer Sheets with a non-adhesive phenolic back. This is a great option for cabinet refacing and can be used on cabinet face frames and end panels. This is same type of thermofoil material we use for our cabinet doors and drawers and is available in four finishes: White, High Gloss White, Antique White, Stone Grey and Smoke Grey. They will match perfectly!
Give your kitchen or bath a facelift with brand new custom-made replacement cabinet doors, drawers & drawer fronts. Shop online to order your components today!
NON-ADHESIVE PHENOLIC BACK 3D LAMINATE (THERMOFOIL) VENEER SHEETS
Cabinet Doors 'N' More now offers 48 W x 96 H 3D Laminate Thermofoil Veneer Sheets with a non-adhesive phenolic back. This is a great option for cabinet refacing and can be used on cabinet face frames and end panels. This is same type of thermofoil material we use for our cabinet doors and drawers and is available in four finishes: White, High Gloss White, Antique White, Stone Grey and Smoke Grey. They will match perfectly!
The non-adhesive phenolic backing provides a barrier between the thermofoil and the glue. We recommend contact cement to be used for product application. 3D Laminate is for inside use only and do not recommend use for outside applications.
Phenolic Backer Thickness: .55mm (1/32 + or -)
Thermofoil Thickness: 1/16 to 1/32 depending on the color
Most colors are offered at $189.00 per sheet. High Gloss White offered at $219.00 per sheet.
Tools & Materials needed to install laminates:
Tape measure
150 grit sandpaper or sanding block
Utility knife
Table or Circular Saw
Router (if available)
J-Roller/Wood scraper
Tack cloth
Mini-Vac
Hammer
putty knife
3’ straight edge
Contact cement or adhesive
Installation Tips
Critical: Laminates should be placed flat and allowed to acclimate for 48 hours before installation.Surface Prep: Fill in any voids on the surfaces with wood putty. Lightly sand any surfaces you plan to cover. Clean the area and wait for the it to thoroughly dry. Do not use a power sander. Use a tack cloth to remove excess dust.Cutting: Use a veneer/laminate slitter, rotary cutter, or sharpened utility knife/straight edge to cut the laminate. Cut the laminate strips ½” wider and 2” longer than the area you plan to cover (stiles/rails). We recommend doing the stiles first and then the rails. Apply the laminate strips to one opening at a time.Adhering: We recommend contact cement to be used for product application. Finishing: Use a razor knife to remove the excess material and finish with a hand file or 150 grit sand block to trim the excess material.
Learn More About Cabinet Accessories & Hardware
Updating your Cabinets with Laminate Sheets
How to Order and Install Moulding, Veneer & End Panels
Replacement Cabinet Shelving
Formica Brand Laminate 48 in. x 96 in. Recycled Leather Veneer Sheet in Antique Grey Crocodile in the Laminate Sheets department at
Formica Brand Laminate Woodgrain 48-in W x 96-in L Weathered Fiberwood Natural Grain Wood-look Kitchen Laminate Sheet in the Laminate Sheets department at
Our 24 In. W x 96 In. PSA polyback veneer sheet is pliable and easy to work with so your finished face frames look great and have a seamless finish.
24 IN. W X 96 IN. H PSA POLYBACK VENEER SHEET
Shown in Oregon Pine Finish Contemporary Strata 3 Piece Slab Style Cabinet Doors & Drawer Fronts When Conestoga first introduced its Strata TSS
Strata Cabinet Doors & Drawer Fronts - 3 Piece Slab Style
Strata Cabinet Doors & Drawer Fronts - 5 Piece Shaker Style
Keystone Wood Specialties Refacing Catalog by Keystone Wood Specialties - Issuu
Natural Wood 0.594-in x 48-in x 96-in Plywood Panel Siding in the Wood Siding & Accessories department at
Benefits of Different Sized Wall Panels
Aluminum laminate is constructed with an ultra-thin layer of metal with standard HPLs (high-pressure laminates) and phenolic paper backing. It allows standard woodworking tools to be used in fabrication. Most finishes are lacquered for chemical and scratch resistance. The polished finishes are usually anodized. Suitable for a variety of applications.
Matte Rose Gold 4ft. x 8ft. Aluminum Laminate Sheet (Set of 5) FromPlainToBeautifulInHours
Formica Brand Laminate Woodgrain 48-in W x 96-in L Walnut Fiberwood Natural Grain Wood-look Kitchen Laminate Sheet in the Laminate Sheets department at
FromPlainToBeautifulInHours Gun Metal Mill 4ft. x 8ft. Aluminum Laminates Sheet
Full Select Red Oak Veneer