QU90008 Gear Marking Compound

Buy Now QU90008 Gear Marking Compound is used for checking the tooth contact pattern when setting up axle ring and pinion gears.
QU90008 Gear Marking Compound is used for checking the tooth contact pattern when setting up axle ring and pinion gears. Contents net wt. 3g. USA Made. Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project! Dan the Gear Man® Tech Notes: Best Results  To Apply Wear Gloves  California Proposition 65 MSDS Matching Parts Applications Tech Note 1: Best Results For best results, there must be some resistance applied to the differential and ring gear as you turn the pinion gear. For a rear axle, you can install the axle shafts and brake drums and lightly apply the parking brakes. For front axles, put a wrench on a ring gear bolt and apply pressure against the rotation of the gear. Tech Note 2: To ApplyBrush the Gear Marking Compound on both sides of several ring gear teeth. Rotate the pinion gear so it turns the ring gear several times in both directions. Check the contact pattern with the desired pattern show in a service manual or installation instructions specifically intended for the gear set you are using. Tech Note 3: Wear GlovesWear gloves when using Gear Marking Compound. Tech Note 4: California Proposition 65This product contains a chemical known in the State of California to cause cancer. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. (source MSDS dated 4/17/2018) Tech Note 5: MSDSMSDS Tech Note 6: Matching PartsQT9404 Application BrushQU90009 Universal Axle Service Pack Applications:  Universal for all Axle Gear Sets

Qu20237 New 4.30 Ratio Dana 50 Ring and Pinion Set

Yukon Gear Marking Compound & Brush, 10ml, 5 Pack (2ml

QU11059 Pinion Shaft Lock Screw

is a good used 35 spline spider gear set taken from axle assemblies our Research and Development Department had for part verification and tool

QU20272U Used Dana 60 Internal Diff Kit

QU20240U Good Used Ford Dana 50 Loaded Differential Case

ACDelco GM Original Equipment 10-5055 Gear Marking

Pinion Marking Compound

Qu50580 GM 10 Bolt Basic Front Differential Bearing and Seal Kit

QU40491 Diff Case Kit for 3.73 and numerically lower ratio Dana 80 open differential Rear Axles was primarily used in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks with 3.54 axle ratios. Also See QU40484 Loaded Dana 80 Diff Case with internal gears and differential bearings.

Qu40491 Dana 80 Bare Fast Ratio Open Differential Case

Includes brush.

Ring Gear Marking Compound Paint Yellow w/ Brush

Permatex Gear Marking Compound 80038; Prussian Blue .75 oz Squeeze Tube

Yukon Gear Marking Compound & Brush, 10ml, 5 Pack (2ml

Dodge Ram Front Axle Service 2003-2013

QU40490 Dana 80 Bare Slow Ratio Open Differential Case - Torque King 4x4