Resin Casting – Pressure Pot 20Ltr

Resin Casting – Pressure Pot 20Ltr

4.6
(506)
Write Review
More
$ 166.00
Add to Cart
In stock
Description

Resin Moulding Casting Tank/Pot 20 Litre Internal Dimensions Height = 39cm Diameter = 32cm. 60Psi maximum working pressure. Casting under pressure is the best way to make high quality resin castings. This is especially true with difficult recesses and complex moulds. Pressure casting compresses air bubbles to sizes hard to detected by the human eye creating a virtually bubble free casting. Simply cast your part in your mould and then insert your mould into the pressure pot. Apply positive air pressure from any regulated compressor and leave to cure under pressure. These tanks are modified for casting only and can not be used for paint. All unused outlets are permanently capped with 150psi 316 stainless steel caps. Important points regarding pressure tanks: The maximum working pressure is governed by a mechanical safety valve, recommended good working practice is to use at a working pressure of 60 Psi or below. Constant air supply - No pressure tank is 100% air tight so whilst in use it must be connected to an air supply so the unavoidable slight loss is automatically balanced.

Top Finish 20lt Resin Casting Pressure Pot – Millin

G4 Pond Sealer / Damp Seal Glassfibre and Resin Supplies Ltd

Resin Casting 5 Gallon (20 Liters) Pressure Pot Tank - Air Tight Clamp On Lid 848849083651

Resin Casting – Pressure Pot (10L / 20L)

TCP Global 5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing

Watts Water Pressure Reducing Valve with PEX Connections - 19.05 mm in Cork

Plastic Syringe – 10ml or 60ml Glassfibre and Resin Supplies Ltd

Epoxy Bund Coat – Exceptional Chemical Resistance – 5kg

California Air Tools - Pressure Pot for Resin Casting

Gas Regulator in Wexford

5 Gallon (20 Liters) Pressure Pot Tank for Resin Casting — TCP Global