SG90 Servo  m5stack-store

SG90 Servo m5stack-store

4.9
(73)
Write Review
More
$ 3.50
Add to Cart
In stock
Description

DescriptionSG90 servo is a custom 9g servo motor from M5Stack. This is totally compatible with the "8Servos" HAT and "PuppyC" base. This micro servo is very easy to use for beginners. There is no need to use a dedicated servo-drive board with feedback control and a complicated gearbox. Any common pwm driver or a micro controller can easily control this servo. Compared to driving a stepper motor, a servo is much simpler to use. You can use it to do interesting small projects requiring angular movement and/or control.The commonly used pulse width is 1-2ms (-90° position - 1ms , 0° position - 1.5ms, 90° position - 2ms),working at 50Hz. Going beyond the specified pulse width range will damage the servo.If you feel that the cable is not long enough, you can purchase the servo extension cable to extend it.The yellow wire is for the control signal, brown is for the ground, and the red wire is for the Vcc (voltage). Pay attention to the supply current and voltage to prevent the servo from getting damaged.Product FeaturesGear material: plasticTorque: 1.6kg•cm/4.8V;1.8kg•cm/6.0VSpeed: 0.1sec/60°/4.8V;0.09sec/60°/6.0VCable length: 3cmdead zone: 4μmSpline: 21TeethVoltage: 4.8-6.0VSpecificationResourcesParameterNet weight9gGross weight12gProduct Size23mm x 12.2mm x 29mmPackage Size100 x 120 x 13mmLearn Clock that melt time Clock that melt time This is the clock developed to take away the viewer's time Deep Learning Speech Commands Recognition on ESP32 Deep Learning Speech Commands Recognition on ESP32 Train a neural network model in 10 minutes, and use it on ESP32 with MicroPython to control a light switch. Everything done in browser. 2 Servos, 1 Grove Port 2 Servos, 1 Grove Port Control two servos using only one grove port on M5Stack products. M5Stack Christmas Santa detector M5Stack Christmas Santa detector Do you want to know when Santa Claus arrives without scaring the reindeer? It also works with the Wise Men! M5 Mini Hackathon M5 Mini Hackathon A inner maker competition of M5Stack. Desk-Robot Assistant Based on M5Stick-V and M5Stack Desk-Robot Assistant Based on M5Stick-V and M5Stack This project is based on the use of the development system M5StickV, for the classification of emotions. M5STACK Touch Less Entry M5STACK Touch Less Entry On hand gesture, you can open the door without touching the handle M5STACK AND NODEMCU USED. M5.A.R.S Quad M5.A.R.S Quad S.M.A.R.S Quad using M5Stack electronic components. 3 in 1 Sanitizer Dispenser 3 in 1 Sanitizer Dispenser We have devised with an innovation that dispenses hand sanitizer, measures the temperature of user, shows the count of people in vicinity. SEAM [Safe-Entry Access Machine] SEAM [Safe-Entry Access Machine] An automatic system to perform the tasks of Safe Entry. It consist an adjustable Thermometer, RFID / QR Code Check in and Counting.LEARN AND DOCUMENTSDOCUMENTS
Open-source modular toolkits for IoT devices based on ESP32-updated version of ESP8266. With stackable modules, user-friendly IDE, enabling rapid and high-quality prototyping, STEM education, engineering and mechanical use.
Description SG90 servo is a custom 9g servo motor from M5Stack. This is totally compatible with the 8Servos HAT and PuppyC base. This micro servo is very easy to use for beginners. There is no need to use a dedicated servo-drive board with feedback control and a complicated gearbox. Any common pwm driver or a micro controller can easily control this servo. Compared to driving a stepper motor, a servo is much simpler to use. You can use it to do interesting small projects requiring angular movement and/or control.The commonly used pulse width is 1-2ms (-90° position - 1ms , 0° position - 1.5ms, 90° position - 2ms),working at 50Hz. Going beyond the specified pulse width range will damage the servo.If you feel that the cable is not long enough, you can purchase the servo extension cable to extend it.The yellow wire is for the control signal, brown is for the ground, and the red wire is for the Vcc (voltage). Pay attention to the supply current and voltage to prevent the servo from getting damaged. Product Features Gear material: plastic Torque: 1.6kg•cm/4.8V;1.8kg•cm/6.0V Speed: 0.1sec/60°/4.8V;0.09sec/60°/6.0V Cable length: 3cm dead zone: 4μm Spline: 21Teeth Voltage: 4.8-6.0V Specification Resources Parameter Net weight 9g Gross weight 12g Product Size 23mm x 12.2mm x 29mm Package Size 100 x 120 x 13mm Learn Clock that melt time Clock that melt time This is the clock developed to take away the viewer's time Deep Learning Speech Commands Recognition on ESP32 Deep Learning Speech Commands Recognition on ESP32 Train a neural network model in 10 minutes, and use it on ESP32 with MicroPython to control a light switch. Everything done in browser. 2 Servos, 1 Grove Port 2 Servos, 1 Grove Port Control two servos using only one grove port on M5Stack products. M5Stack Christmas Santa detector M5Stack Christmas Santa detector Do you want to know when Santa Claus arrives without scaring the reindeer? It also works with the Wise Men! M5 Mini Hackathon M5 Mini Hackathon A inner maker competition of M5Stack. Desk-Robot Assistant Based on M5Stick-V and M5Stack Desk-Robot Assistant Based on M5Stick-V and M5Stack This project is based on the use of the development system M5StickV, for the classification of emotions. M5STACK Touch Less Entry M5STACK Touch Less Entry On hand gesture, you can open the door without touching the handle M5STACK AND NODEMCU USED. M5.A.R.S Quad M5.A.R.S Quad S.M.A.R.S Quad using M5Stack electronic components. 3 in 1 Sanitizer Dispenser 3 in 1 Sanitizer Dispenser We have devised with an innovation that dispenses hand sanitizer, measures the temperature of user, shows the count of people in vicinity. SEAM [Safe-Entry Access Machine] SEAM [Safe-Entry Access Machine] An automatic system to perform the tasks of Safe Entry. It consist an adjustable Thermometer, RFID / QR Code Check in and Counting. LEARN AND DOCUMENTS DOCUMENTS

Arduino: Controlling Servo With ESP32 - iCircuit

Kitronik Clippable Servo - RobotShop

Module SERVO SKU:M014 Description SERVO is made to implement the bestest, easiest way to drive Servo motors. This M5 module will make quick work of

[EOL] SERVO Module Board 12 Channels

Final M5Stack Core Servo Motor Controller

C-Back HAT with Servo Driver (STM32F0)

Servo Kit 360° Brick-compatible

C-Back HAT with Servo Driver (STM32F0)

M5 ACCESSORIES

SG90 Servo m5stack-store

m5-docs

C-Back HAT with Servo Driver (STM32F0)

M5 ACCESSORIES

Glolo basis collection - Do not delete