Plastixs sells Resin Remover, which has powerful solvents that remove resin build-up without needing to remove the mold, minimizing downtime
REVOLOOP™ Recycled Plastics Resins
Flux-Off® Rosin Fast-Drying Aerosol
Slide The Stripper Resin Remover, 16 oz Aerosol Can, 41914
42-46 Gallon 4 MIL Extra Heaviest Duty Contractor Garbage Bags
Removes fine scratches, haziness and abrasions from most plastics. With repeated use, NOVUS No. 2 restores faded and discolored plastics. Removes the damage instead of filling it in Buffs out quickly After restoring, seals with a coat of polish Observe condition of the surface to be treated. The deeper the scratches, the greater the pressure required to remove them. If the surface is dirty, clean with NOVUS No.1 before applying NOVUS No. 2. Shake well. Test in an inconspicuous area.
Novus Plastic Polish #2 Fine Scratch Remover 8oz
Introduction to Asahi Kasei 's engineering plastics, Download slides
Plastics
SLIDE® Epoxease Mold Release No. 40614
303 Indoor/Outdoor Multi-Surface Cleaner 16-oz Trigger Sprayer #30445 (LAS)
Klean Strip Acetone Solvent and Thinner 1 gal - Ace Hardware
AceTronic Industrial Controls Resin Remover No.41914 - AceTronic Industrial Controls
Phrozen Rigid PC/GF-like 3D Printing Resin Phrozen Technology: Resin 3D Printer Manufacturer
SLIDE® Epoxease Mold Release is a synthetic wax-based, non-silicone release. EpoxEase is formulated to prevent the sticking commonly seen when using
SLIDE® Epoxease Mold Release No. 40614
SLIDE® NEXGEN Mold Cleaner No. 46410