Tool Tethering Kit for Small Hand Tools - 1lb / 0.5kg
The Squids® Hand Tool Tethering Kit includes a 3156 Coil Tool Lanyard with Single Carabiner and the 3740 Hand Tool Attachment Trap – Slips™ Variety 4-Pack. This tool tethering kit allows you to tether four different sized screwdrivers and hex key wrenches making it easy to use your tools on the job while preventing dropped objects when working at-heights.
The Squids 3194 Hand Tool Tethering Kit includes a 3156 Coil Tool Lanyard with Single Carabiner and the 3740 Hand Tool Attachment Trap Slips Variety 4-Pack. This tool tethering kit allows you to tether 4 different sized screwdrivers and hex key wrenches making it easy to use your tools on the job while preventing dropped objects when working at-heights.</p>
The 3156 Coil Tool Lanyard is more than just a small tool and hard hat lanyard. Built and tested to endure tough conditions and rated to support weight up to 2lbs / 0.9kg, the coiled lanyard is made with a low-profile design and durable plastic. With the lightweight aluminum carabiner on one end and a tethering loop on the other, it easily connects to tool anchors and attachments, even while wearing gloves. The coiled tether design reduces lanyard length to prevent snag and tangle hazards. The coil stretches from a compact 12in to 48in / 30cm to 122 cm.</p>
STRAIGHTFORWARD INSTALLATION</h3>
No additional install tools or complicated taping or shrinking! The Slips design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect the Squids 3156 Coil Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.</p>
Simply poke the end of the hand tool through the orange interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. To remove the Slips, simply push on the tab to loosen and then slide it off the shaft of the tool. No adhesive residue or mess will be left behind!</p>
PERFECT FOR SMALL HAND TOOLS</h3>
Small hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can make it difficult for tapes, shrinks and tails to be applied. The Squids Hand Tool Slips allow you to tether tools up to 1lb. based on their diameter. Four sizes of Slips are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size.</p>
The Squids 3194 Hand Tool Tethering Kit includes both a Squids 3156 Coil-Cable Tool Lanyard and a pack of four Squids 3740 Hand-Tool Slip Traps, making it ideal for retrofitting a wide variety of fastener drivers for tethering. Prepare up to four differently sized screwdrivers, nut-drivers and/or hex keys for quick and easy interchanges, so you can focus on the task at hand, while minimizing the potential for inconvenient and potentially very dangerous tool drops when you're working at heights.
Ergodyne Squids 3194 Hand Tool Tethering Kit - 1lb
This ergodyne 3186 tool tethering kit contains all the essential tools you need to keep your tools safe and organized. It is designed for professional technicians who are always on the go. This kit has an aluminum power tool holder trap that can securely hold your battery. The tethering kit also includes a tape wrap, glove clip, tape measure sleeve, power tool sleeve and hardware bag with aluminum and stainless steel components.
Ergodyne Squids 3186 Iron/Steel Worker Tool Tethering Kit
Ergodyne Tool Gear
The Squids 3170 Tower Climber Tool Tethering Kit provides a comprehensive tool lanyard and tool-attachment solution designed specifically for those tools commonly used by tower climbers in the telecom, electrical-line and antenna maintenance areas. Several tool lanyards in a range of styles provide options to accommodate nearly anyone in any use-related situation.
Squids 3170 Tower Climber Tool Tethering Kit
Ergodyne Squids 3772 Radio Holster Trap - Jendco Safety Supply
Squids Radio Holster Trap, Black, Small, 19772 at Tractor Supply Co.
DBI-SALA Python Safety Quick Spin, X-Large, 10 pk, 1500030
Cell Phone Tool Tethering Kit - 1lbs / 0.5kg
The Squids 3772 Radio Holster Trap is the safest way to keep cordless radios secure and accessible while working at heights. This easy-to-use, ANSI/ISEA 121-compliant holster acts as an all-in-one attachment point for tethering cordless radios to a tool lanyard”decreasing the drop and break risks of expensive communication devices. With rugged polyester construction and heavy-duty elastic hook & loop straps, this radio holster trap protects radios in even the harshest worksite conditions.
Squids 3772 Radio Holster Trap Black / L
Klein Tool Construction Catalog by Ram Tool Construction Supply Co. - Issuu
Sidchrome Product Catalogue 2021 by C&L Tool Centre Pty Ltd - Issuu
欠品カラー再入荷！ BY コイルシンプル Install Ford グローブ
Paratech Catalogue V19 by Fremtac // Fire and Rescue - Issuu
