Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing : ID

Adafruit Industries, Unique & fun DIY electronics and kits Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing : ID 918 - This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.128 but for most
This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.128 but for most purposes 1/16 is a good enough approximation) What this means is that there are really 32*16.128 steps per revolution = 516.096 steps! The shaft is flattened so its easy to attach stuff to it with a set-screw. A perfect first stepper motor and works well with the Motor Shield for Arduino.The gearing has a few side effects which are important to note. First, you shouldn't use interleaved or micro-stepping to control or it will take forever to turn. Instead use single or double stepping. The torque is fairly high but its slower than un-geared steppers - we maxed out at about 20 RPM when powering with 12VDC and about 12 RPM on 9VDC.To use with the Adafruit Motor Shield, connect red to ground (middle), orange and pink to one motor port (say M1) and blue and yellow to the other motor port (say M2). So in order, thats: orange - pink - red - blue - yellow. Then just use the example code that comes with the Adafruit Motor Shield library and set the constructor to Adafruit_StepperMotor *myMotor = AFMS.getStepper(516 ,motornum) and the speed at 5 RPM by calling motor->setSpeed(5). Otherwise, you can also wire it up with some transistors and use the Arduino Stepper library

Micro Mini 8mm Precision Stepping Gear Motor Two-phase Four

Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing : ID

Micro Mini 8mm Precision Stepping Gear Motor Two-phase Four-wire

ELEGOO 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor +

Small Reduction Stepper Motor - 5VDC 32-Step 1/16 Gearing

Micro Mini 8mm Precision Stepping Gear Motor Two-phase Four-wire

Maker/STEM : Micro Center

Size 17 (43000 Series) Double Stack Hybrid Stepper Linear Actuator

Motor : Micro Center

This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with

Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing

Small Reduction Stepper Motor - 12VDC 32-Step 1/16 Gearing