Smooth-On Mold Star 16 Fast is mixed 1A:1B by volume, with no need for a weighing scale. It has a relatively low viscosity, a six-minute pot life and a 30-minute cure time. This soft, strong rubber is tear-resistant, long-lasting, and exhibits very low long-term shrinkage.
SmoothOn Mold Star 16 Fast is mixed 1A:1B by volume with no need for a weighing scale It has a relatively low viscosity a sixminute pot life and a 30minute cure time This soft strong rubber is tearresistant longlasting and exhibits very low longterm shrinkage Vacuum degassing is not required for most applications After curing molds made with Mold Star 16 Fast are heatresistant up to 450°F (232°C) suitable for casting lowtemperature melt metal alloys Please note that it’s not intended for brushon mold making
Mold Star™ 16 FAST - The Engineer Guy
Smooth-On Mold Star – Jerrys Artist Outlet
Smooth-On Range Glassfibre and Resin Supplies Ltd
Mold Star 16 Fast - 1A:1B Mix by Volume Platinum Silicone Rubber
Curing Silicone in SLA UV Molds - Part 2 - Joshua Woehlke
Smooth-On Mold Star 16 Fast - 1a:1b Mix by Volume Platinum Silicone Rubber - Gallon Unit
smooth-on
Smooth On Silicona Platino Mold Star 16 Fast Ms Kit 0,90kg
Mold Star™ 16 FAST Product Information
Mold Star™ rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star™ silicones feature
Smooth-On Mold Star 16 FAST, Trial Set
Smooth-On's Mold Star 16 FAST Rubber - 2StoryProps: How2
2StoryProps: How2: Smooth-On's Mold Star 16 FAST Rubber