Smooth-On Silicone Thinner™
lt;p><strong>Silicone Thinner™</strong> is a non-reactive silicone fluid that will lower the mixed viscosity of tin cure (condensation) or platinum cure (addition) silicone rubber products.</p> <p>Features</p> <p><strong>Silicone Thinner™ offers the following advantages:</strong></p> <ul> <li>A lower mixed viscosity (A+B) means that the rubber will de-air faster when vacuuming.</li> <li>Mixed rubber (A+B) will flow better over intricate model detail.</li> <li><strong>Silicone Thinner™</strong> will lower the ultimate shore hardness (durometer) of cured silicone rubber.</li> <li>Pot life (working time) and cure time is increased in proportion to the amount of <strong>Silicone Thinner™</strong> used.</li> </ul> <p><strong>Disadvantage:</strong> Ultimate tear and tensile strength are reduced in proportion to the amount of <strong>Silicone Thinner™</strong> added, however knotty tear properties of the <strong>Mold Max™</strong> series rubbers are unaffected.</p> <p></p> <p>Instructions</p> <p>Materials should be stored and used in a warm environment (73° F / 23° C). This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.</p> <p><strong>*Silicone Thinner® is added as a percentage of the total Part A+Part B rubber system. An accurate gram scale must be used. Weigh out and pre-mix required amount of Silicone Thinner® with Part A of silicone rubber before adding Part B.</strong> Mix all components thoroughly and vacuum as directed on mold rubber technical bulletin.</p> <p><strong>It is not recommended to exceed 10% by weight of total system (A+B).</strong></p> <p><strong>Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.</strong></p> <p></p> <p></p> <p></p>
Silicone Thinner™ is a non-reactive silicone fluid that will lower the mixed viscosity of tin cure (condensation) or platinum cure (addition) silicone rubber products. Features Silicone Thinner™ offers the following advantages: A lower mixed viscosity (A+B) means that the rubber will de-air faster when vacuuming. Mixed rubber (A+B) will flow better over intricate model detail. Silicone Thinner™ will lower the ultimate shore hardness (durometer) of cured silicone rubber. Pot life (working time) and cure time is increased in proportion to the amount of Silicone Thinner™ used. Disadvantage: Ultimate tear and tensile strength are reduced in proportion to the amount of Silicone Thinner™ added, however knotty tear properties of the Mold Max™ series rubbers are unaffected. Instructions Materials should be stored and used in a warm environment (73° F / 23° C). This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. *Silicone Thinner® is added as a percentage of the total Part A+Part B rubber system. An accurate gram scale must be used. Weigh out and pre-mix required amount of Silicone Thinner® with Part A of silicone rubber before adding Part B. Mix all components thoroughly and vacuum as directed on mold rubber technical bulletin. It is not recommended to exceed 10% by weight of total system (A+B). Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.
Smooth-On - Smooth-Cast 300 Liquid Plastic Compound
Body Double™ Standard Set Product Information
Rebound™ 25 Product Information
Ecoflex™ 00-20 Glassfibre and Resin Supplies Ltd
Silc Pig silicone color pigments from Smooth-On are designed for coloring silicone rubber compounds. These hyper realistic colors can be mixed for custom colors, and even added to silicone paint bases allowing you to create dramatic effects and castings. Highly concentrated, these colorants require just a small amount to color a proportionally larger amount of material. The recommended loading range is .01% to 3% of total system weight.
Smooth On Silc-Pig Silicone Pigment 9-Pack Color Sampler
Platinum Silicone Accessories, Take Your Silicone Rubber Further
Silicone Thinner™ is a non-reactive silicone fluid that will lower the mixed viscosity of tin cure (condensation) or platinum cure (addition) silicone
Smooth-On Silicone Thinner™
Body Double™ Fast Set - The Compleat Sculptor
Dragon Skin™ FX‑ Pro™ Product Information
Smooth-On Silicone Thinner™_中国区品牌产品供应商_产品价格_原装进口_Lubpur超润
Ecoflex™ 00-20 Product Information
Silicone Thinner
Rebound™ 40 Product Information
