Stainless Steel 5/16 J-Hooks For Toyota Vehicles – PowerTrays

PowerTray's J-hooks are custom made in America to our specifications. They feature high quality SAE 304 stainless steel, so there is never a worry about rust or battery corrosion. PowerTray's J-hooks are also much larger then OEM J-hooks, with a 5/16" diameter shaft compared to the OEM's, which are an M6 thread. The ho

PowerTray's J-hooks are custom made in America to our specifications. They feature high quality SAE 304 stainless steel, so there is never a worry about rust or battery corrosion. PowerTray's J-hooks are also much larger then OEM J-hooks, with a 5/16 diameter shaft compared to the OEM's, which are an M6 thread. The hook itself features a cross hatch pattern which allows for a better grip on the vehicle's body. We also include locking serrated flange nuts to securely fasten the PowerTray Dual Circuit Breaker Battery Tie Down to your vehicle.

Why do we include 2 different lengths of J-hooks?

The Mounting locations Toyota uses in the engine bay to secure the battery to the body are in different locations from the front J-hook to the rear J-hook. The front J-hook mounting location is 2 lower then the rear mounting location. The 10 J-hook is used for the front mounting location and the 8 J-hook is used in the rear mounting location. 

Included:

• 1x 10 5/16 stainless steel J-hook
  
• 1x 8 5/16 stainless steel J-hook
• 2x 5/16 Stainless Steel locking serrated flange nuts

Longer J-hooks are required for taller then stock batteries, such as group 31 batteries.

Made in the USA

Peerless Alloy Steel J-Hooks (Style B) for lifting are made from 8620 or 4130 alloy steel. They are heat-treated, proof tested and stamped with the

Peerless 5/16 Alloy Steel Lifting J-Hook (Style B)(WLL 250 lbs)

powertrays – Page 2 – PowerTrays

Bakflip MX4 Prelim Review, Page 13

BantamX/SourceLT PowerTray > 4Runner/ FJ Cruiser/ GX – PowerTrays

Adding a Switch-Pros PowerTray to your Jeep JL/JT – PowerTrays

Finally found one!!

powertrays – Page 2 – PowerTrays

New Power Steering Gear Rack Replacement Parts for

YOU WILL HAVE THREE OPTIONS FOR THE STYLE OF TRAY TO MOUNT YOUR SPOD BANTAMX: 1. Original BantamX: The brand new sPOD BantamX and SourceLT will save

BantamX/SourceLT PowerTray > 4Runner/ FJ Cruiser/ GX

POWER TRAYS - Mounting Solutions for Expedition Vehicles – PowerTrays

New Power Steering Rack Gear Replacement Parts for

Peerless Alloy Steel J-Hooks (Style C) for lifting are made from 8620 or 4130 alloy steel. They are heat-treated, proof tested and stamped with the

Peerless 5/16 Alloy Steel Lifting J-Hook (Style C)(WLL 250 lbs)

Slee 2nd Battery tray / Redarc Controller bundle - 200 Series Land