Sublimation Keychain Rectangle White

2 3/4" x 1 1/4" Rectangle Keychain Add any image, quote, or photo for a simple, everyday item that is always in demand. Our key chains include rings. Smooth white sublimatable fabric on both sides. Note: The recommended settings above for sublimation may need adjustments forbest results. Sublimation settings will vary
2 3/4" x 1 1/4" Rectangle KeychainAdd any image, quote, or photo for a simple, everyday item that is always in demand. Our key chains include rings. Smooth white sublimatable fabric on both sides.Note: The recommended settings above for sublimation may need adjustments forbest results. Sublimation settings will vary depending on the heat press brandand model ink and paper and atmospheric conditions.2nd Note: The keychain is two sided and will need to be sublimated twice oncefor each side3rd Note: The layers of soft paper towel help to trap ink that is dispersedoutside of the edges of the substrate if there is an overprint area or fullbleed in the artwork.Supplies needed:- sublimatable substrate- sublimation transfer- teflon or scratch paper- heat tape (H107)- soft paper towel (optional)Heat press settings:- temperature - 390 degrees F- dwell time - 1:00 - 1:15 minutes- pressure - light to mediumSublimation:Layer the press from the bottom pad to the top heat platen as follows:1. teflon sheet or scratch paper2. 2-3 layers of soft paper towel (optional)3. substrate4. transfer5. teflon sheet or scratch paperSteps:1. Remove the ring from the subtrate. It could cause a faded area.2. Position the substrate onto the transfer and adhere transfer to substrateusing heat tape.3. Place the transfer and substrate into the press (transfer on top ofsubstrate).4. Place the teflon sheet or scratch paper over the transfer.5. Press the items using the sublimation settings listed above.6. Remove items from the press immediately. Use heat resistant gloves ifnecessary - the items will be very hot.7. Remove transfer from substrate.8. Let cool then sublimate the 2nd side.9. Once complete replace the ring.Tips:- If the image of the final product appears light increase the pressure orthe dwell time slightly (5-15 seconds).- If the image on the final product appears blurred or substrate appearsyellowed reduce the dwell time slightly (5-15 seconds).

2 3/4 x 1 1/4 Rectangle Keychain

Add any image, quote, or photo for a simple, everyday item that is always in demand. Our key chains include rings. Smooth white sublimatable fabric on both sides.

Note: The recommended settings above for sublimation may need adjustments for
best results. Sublimation settings will vary depending on the heat press brand
and model ink and paper and atmospheric conditions.

2nd Note: The keychain is two sided and will need to be sublimated twice once
for each side

3rd Note: The layers of soft paper towel help to trap ink that is dispersed
outside of the edges of the substrate if there is an overprint area or full
bleed in the artwork.

Supplies needed:
- sublimatable substrate
- sublimation transfer
- teflon or scratch paper
- heat tape (H107)
- soft paper towel (optional)

Heat press settings:
- temperature - 390 degrees F
- dwell time - 1:00 - 1:15 minutes
- pressure - light to medium

Sublimation:
Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. 2-3 layers of soft paper towel (optional)
3. substrate
4. transfer
5. teflon sheet or scratch paper

Steps:
1. Remove the ring from the subtrate. It could cause a faded area.
2. Position the substrate onto the transfer and adhere transfer to substrate
using heat tape.
3. Place the transfer and substrate into the press (transfer on top of
substrate).
4. Place the teflon sheet or scratch paper over the transfer.
5. Press the items using the sublimation settings listed above.
6. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
7. Remove transfer from substrate.
8. Let cool then sublimate the 2nd side.
9. Once complete replace the ring.


Tips:
- If the image of the final product appears light increase the pressure or
the dwell time slightly (5-15 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed reduce the dwell time slightly (5-15 seconds).

10Pcs Leather Keychain Blank MDF Keychain Sublimation Heat Keychain Kit Jewelry Making

50 x 60 white sublimation blanket

Sublimation Blanket - White

Sublimation Apron 28 x 31 1/2 White

Sublimation Blanks Acrylic Keyring W/ Light Blue Tassel(Rectangle,4*6*0.4cm) - BestSub - Sublimation Blanks,Sublimation Mugs,Heat Press,LaserBox,Engraving Blanks,UV&DTF Printing

JASHVIRA Sublimation Single Side MDF Keychain Blank, Pack of 20 pcs, ( Rectangular Shape) Key Chain Price in India - Buy JASHVIRA Sublimation Single Side MDF Keychain Blank, Pack of 20 pcs

Sublimation Apron 28 x 31 1/2 White

Package Include: Each package has 10 pcs square Heat Transfer Keychain Blanks. Material: MDF(Medium Density Fiberboard),Printable on Double-sided.

alblinsy hefei 10pcs DIY Sublimation Double-Sided Heat Transfer Keychain Blanks Wooden Hard Board Key Rings White Blank MDF Key Chain for Heat

Add any image, quote, or photo for a simple, everyday item that is always in demand. Smooth white sublimatable fabric on both sides., :: Details ::,

Rectangle Sublimation Keychain :: 2.75 x 1.25

RECTANGLE SUBLIMATION BLANKS Keychain Rectangle Keychain Keychain Blanks $24.39 - PicClick AU

Sublimation Blanks Keychains Metal Bottle Opener Blank Key Rings Aluminum Heat Transfer Rectangle Sublimation Keychains For Man Boyfriend Husband Cust

10Pcs Leather Keychain Blank MDF Keychain Sublimation Heat Transfer Keychain Kit Jewelry Making

Kreatively Slayed Rectangle Keychain Sublimation Blank