30 oz STRAIGHT Sublimation ready skinny tumbler WATER BOTTLE, 30oz hyd – ACC Sublimation Blanks & Designs
Skinny tumbler for sublimation. White. These are the straight version, no taper. This style includes a screw-on lid with attached handle and a screw-on slide lid. Leak resistant design. 30 oz straight skinny metal tumbler. Includes screw on lid with handle and attached straw, screw on slider lid, and plastic straw. (r
Skinny tumbler for sublimation. White. These are the straight version, no taper. This style includes a screw-on lid with attached handle and a screw-on slide lid. Leak resistant design.
30 oz straight skinny metal tumbler. Includes screw on lid with handle and attached straw, screw on slider lid, and plastic straw. (rubber bottom sold separately if desired)
Shiny white sublimation coating that produces vibrant colors. For use in a mug press or convection oven. Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately, and accessories such as rubber bottoms and straw cleaning brushes are also available in a separate listing.
***Convection Oven Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations.
Apply sublimation transfer on the surface of the tumbler using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler. Pulling the tape/transfer as tight as possible with no air pockets. If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides. Apply shrink wrap using a heat gun to shrink it tight to the tumbler. Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway. **If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!Remove from oven and immediately remove shrink wrap and transfer. TUMBLER WILL BE HOT!!No sealant is necessary on sublimation tumblers. *Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed.
30 oz Sublimation ready STRAIGHT skinny tumbler RTS – ACC Sublimation Blanks & Designs
Synergy Blanks sublimation tumblers have a high quality sublimation coating and are ready for your custom designs. This is a 30 oz straight skinny
30 oz. Straight Skinny Sublimation Tumbler Blank - White
30 oz Straight Sublimation Tumbler Blank Set, 4 Pack Stainless Steel Skinny Tumbler for Sublimation with Shrink Wrap, Insulated Skinny Slim Water
20oz or 30oz Skinny Straight White Sublimation Tumbler – Sayers & Co.
High-quality sublimation straight skinny tumbler 30oz for full wrap image transfer. Double wall stainless steel, vacuum sealed, the best tumbler for kids.
PYD Life Sublimation Blanks Tumbler 30 oz Straight Skinny Stainless Steel with Lid and Metal Straw 4 Pack
Tswofia 30 Oz Sublimation Skinny Tumbler Set, Stainless Steel Straight Skinny Travel Tumbler Bulk With Sublimation Shrink Wrap Films, Birthday Diy Gift For Women Friends Sisters, 4 Pack, White : Arts
30 oz. Straight Skinny Sublimation Tumbler Blank - White — Synergy Blanks
30 oz Sublimation straight skinny tumbler stainless steel vacuum double walled with lid and plastic straw – Tumblerbulk
30 Oz Straight Sublimation Tumbler Blank Set, 4 Pack Stainless Steel Skinny Tumbler for Sublimation with Shrink Wrap, Insulated Skinny Slim Water Tumbler for Diy, White: Tumblers & Water Glasses
30 Pack 20 oz Sublimation Blank Tumblers White Stainless Steel Tumblers Straight Skinny Bottle Mug Blank Cup with Lid and Straw for Heat Press Machine Sublimation Print DIY Gift Coffee Tea
20oz or 30oz Skinny Straight White Sublimation Tumbler – Sayers & Co.
30 oz Sublimation ready MATTE Straight skinny tumbler RTS – ACC Sublimation Blanks & Designs
Blank 30oz Tumbler
30 oz Sublimation ready STRAIGHT skinny tumbler RTS – ACC Sublimation Blanks & Designs
