Wood Glue Applicator Glue Syringe 20 mL Syringe Glue Applicator

Wood Glue Applicator Glue Syringe 20 mL Syringe Glue Applicator

5
(739)
Write Review
More
$ 10.99
Add to Cart
In stock
Description

If you need a little glue in just the right place or even need a lot of glue in a hidden joint on your project, use the DCT Syringe Applicator. It allows you to apply glue under pressure (up to 550 PSI) in areas such as small openings of dovetail sockets. The glue chamber is approximately 3 inches (7.6cm) in length and
If you need a little glue in just the right place or even need a lot of glue in a hidden joint on your project, use the DCT Syringe Applicator. It allows you to apply glue under pressure (up to 550 PSI) in areas such as small openings of dovetail sockets. The glue chamber is approximately 3 inches (7.6cm) in length and includes 5 mL, 10 mL, 15 mL, 20 mL markings with single ticks in increments of 1 mL (CCs). It holds 20 mL (0.7 fl oz). Use with water-based (water-soluble) wood glues and silicones for maximum syringe longevity and easy cleaning. Simply fill the glue chamber and push down on the plunger to apply glue to your application. This package includes a syringe with a 1/16-inch tip and 1/32-inch tip for your convenience. Glue not included.

  • REPAIR DELICATE ASSEMBLIES: The DCT Glue Applicator Syringe provides up to 550 PSI of pressurized power to apply glue in small places; Injector syringe holds 20 mL (0.7 fl oz) of water-based wood glues; For veneering, lutherie, craft and hobby gluing, furniture joints, wicker chairs, wooden screen doors, laminates, cabinetry, stair rails and banisters, floor squeaks, or even jewelry making and cake decorating; Additionally use for mechanical work to place fine beads of silicone gasket material
  • EASY TO LOAD: Includes an easy fill-port design that allows you to load glue into the chamber two different ways; Method 1 – Unscrew top where handle is, pull out plunger, pour in glue, screw top back on, flip syringe with tip upwards, remove air, screw on your desired tip, and apply; Method 2 – Remove brass tip, submerge this end in a glue container, pull plunger back until full, reinstall brass tip, and apply
  • EASY TO DISPENSE: Dispensing syringe allows you to apply glue under pressure; If you do not enough space to get glue into a joint on your project, instead of disassembly your project, you can drill a small hole and inject glue through the hole into the joint using this wood glue injector
  • MAINTENANCE: Moisten O-ring before inserting plunger and screwing brass tip into barrel; Do not allow glue to dry in the injector (injector may be immersed in water to prevent glue from hardening); Clean well after use; Removable plunger and brass nozzle allow you to clean thoroughly with warm water and brush (not included) (do not use solvent); Regularly lubricate and use cooking oil on O-ring for a smooth, airtight seal
  • PACKAGE CONTENTS: Package includes (1) adhesive syringe and (2) brass tips with O-rings (1/16-inch and 1/32-inch nozzles); Wood glue not included

    California Residents Prop 65 warning: Products may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

    This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

  • If you need a little glue in just the right place or even need a lot of glue in a hidden joint on your project, use the DCT Syringe Applicator. It allows you to apply glue under pressure (up to 550 PSI) in areas such as small openings of dovetail sockets. The glue chamber is approximately 3 inches (7.6cm) in length and includes 5 mL, 10 mL, 15 mL, 20 mL markings with single ticks in increments of 1 mL (CCs). It holds 20 mL (0.7 fl oz). Use with water-based (water-soluble) wood glues and silicones for maximum syringe longevity and easy cleaning. Simply fill the glue chamber and push down on the plunger to apply glue to your application. This package includes a syringe with a 1/16-inch tip and 1/32-inch tip for your convenience. Glue not included.REPAIR DELICATE ASSEMBLIES: The DCT Glue Applicator Syringe provides up to 550 PSI of pressurized power to apply glue in small places; Injector syringe holds 20 mL (0.7 fl oz) of water-based wood glues; For veneering, lutherie, craft and hobby gluing, furniture joints, wicker chairs, wooden screen doors, laminates, cabinetry, stair rails and banisters, floor squeaks, or even jewelry making and cake decorating; Additionally use for mechanical work to place fine beads of silicone gasket materialEASY TO LOAD: Includes an easy fill-port design that allows you to load glue into the chamber two different ways; Method 1 – Unscrew top where handle is, pull out plunger, pour in glue, screw top back on, flip syringe with tip upwards, remove air, screw on your desired tip, and apply; Method 2 – Remove brass tip, submerge this end in a glue container, pull plunger back until full, reinstall brass tip, and applyEASY TO DISPENSE: Dispensing syringe allows you to apply glue under pressure; If you do not enough space to get glue into a joint on your project, instead of disassembly your project, you can drill a small hole and inject glue through the hole into the joint using this wood glue injectorMAINTENANCE: Moisten O-ring before inserting plunger and screwing brass tip into barrel; Do not allow glue to dry in the injector (injector may be immersed in water to prevent glue from hardening); Clean well after use; Removable plunger and brass nozzle allow you to clean thoroughly with warm water and brush (not included) (do not use solvent); Regularly lubricate and use cooking oil on O-ring for a smooth, airtight sealPACKAGE CONTENTS: Package includes (1) adhesive syringe and (2) brass tips with O-rings (1/16-inch and 1/32-inch nozzles); Wood glue not includedCalifornia Residents Prop 65 warning: Products may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

    DCT Wood Glue Applicator Glue Syringe and Tips – 20 mL Syringe Glue Applicator

    Grobet Precision Applicator Syringe 20 Gauge Safe Needle 2cc for Oils Lubricants Adhesives and More | Esslinger

    30Pack 20ml Plastic Syringe Sterile Individual Wrap with Tip Cap&Soft Tube, Measurement and Dispensing Syringe Tools for Science Labs,Liquid Measuring,Feeding Pets,Oil or Glue Applicator (20ml, 30) - Yahoo Shopping

    Luer Lock Syringe - Polypropylene material, good air tightness, measurements are easy to read. 4 Inch Blunt Tip Needles - extra long blunt dispensing

    20 ml Syringe with Luer Lock Needles 4 and Storage Cap | Oil Injector | Glue Dispensing Applicator

    Purchase Good glue syringe 30ml for Multi-Use

    Package contents: 30 packs 20ml plastic syringe with 30pcs Caps, enough for use or replacement . Each syringe is made of 100% Standard Food Grade

    30 Pack 20ml Plastic Syringe for Scientific Labs, Measuring Liquids, Pets, Oil or Glue Applicator

    Syringes Blunt Tip Needle Storage Glue Applicator Oil - Temu

    If you need a little glue in just the right place or even need a lot of glue in a hidden joint on your project, use the DCT Syringe Applicator. It

    DCT | Wood Glue Applicator Glue Syringe and Tips – 20 mL Syringe Glue Applicator

    How to Use a Glue Syringe - glue applicator syringe for rhinestones

    20ml/cc syringe is independent sterile packaging,1ml/cc graduation interval for precise measurement. 20 pcs of total,including 5 pcs syringes, 5 pcs

    20ml/cc Independent Packing Syringe with 14Ga 1.5 Inch Blunt Tip Dispensing Needles and Storage Caps and Needle Caps for Engineered Fluid,Glue

    Precision Applications of Glue, 3ml 5ml Syringes and Blunt Tip Needles(14 15 16 18 19 20 21 22 23 25 Ga), for Liquid Measuring, Craft Paint, Epoxy Resin, Oil or Adhesives Applicator

    Syringes Blunt Tip Needle Storage Glue Applicator Oil - Temu

    Glue Syringe

    For accurately applying glue in awkward spots, nothing beats a needle-tipped syringe. This set of five syringes with 10 blunt-end needles (five

    Glue Syringes