Microscale MI-1: Decal products Microset decal liquid Blue bottle 1 x 30ml (ref. MI-1)

Microset is a decals liquid that enormously helps you during their application. It softens the decals, allowing you to place them over irregular surfaces, and at the same time improves their integration with the paint. The product must be applied with a soft brush, placing a few drops between the decal and the surface of the kit. Once dried enough, so the decal can't be easily moved, apply a little bit of Microsol (ref. MI-2) with a small flat brush over the decal to let it finally mould over the surface. Let it dry for almost 12 hours before coating or handling your kit. With these simple instructions, you'll get a perfect finish. Additional details for the Microset decal liquid - Blue bottle decal products: Manufactured by Microscale with reference MI-1 (also listed as 710208001012). Package measures 50 mm x 95 mm x 50 mm (width x depth x height), weighting 50 g.Box barcode 710208001012 (GTIN/EAN)Product contains 1 x 30ml. Shipping restrictions may apply to certain countries (more info at our FAQ)
Microset is a decals liquid that enormously helps you during their application. It softens the decals, allowing you to place them over irregular surfaces, and at the same time improves their integration with the paint. The product must be applied with a soft brush, placing a few drops between the decal and the surface of the kit. Once dried enough, so the decal can't be easily moved, apply a little bit of Microsol (ref. MI-2) with a small flat brush over the decal to let it finally mould over the surface. Let it dry for almost 12 hours before coating or handling your kit. With these simple instructions, you'll get a perfect finish. Additional details for the Microset decal liquid - Blue bottle decal products: Manufactured by Microscale with reference MI-1 (also listed as 710208001012). Package measures 50 mm x 95 mm x 50 mm (width x depth x height), weighting 50 g. Box barcode 710208001012 (GTIN/EAN) Product contains 1 x 30ml. Shipping restrictions may apply to certain countries (more info at our FAQ)

Microscale Decals: Micro Set Solution - 1 oz. bottle (Decal Setting Solution/Remover)

Quinta Studio 1/72 F-4E early/EJ decal (Finemolds kit)

Liquid Decal Film Every modeler and decal-user should have Micro Liquid Decal Film on hand, especially if you have been modeling for some time. The typical decal scrap box is not the best place to store the decals. Exposure to air, sunlight, moisture, great swings in temperature/humidity, or general abuse can cause decals can go bad. Restore old decals by coating them with MI-12 Liquid Decal Film before wetting. Use Isopropyl Alcohol to clean or thin.

Microscale Industries Micro Liquid Decal Film 1 oz

Micro Liquitape is a liquid adhesive that when applied to one side of a part and allowed to dry, can be pressed on to another clean part where it will

Micro Liquitape - 1 x 30ml. Glue manufactured by Microscale (ref. MI-10)

Microscale Industries Micro Liquid Decal Film, 1 oz : Arts, Crafts & Sewing

Decal Setting Solution-Micro Scale Micro Sol 102 + Micro Set 101 Package Decal : Arts, Crafts & Sewing

Micro Liquid Decal Film by Microscale Industries

Microscale Industries, Inc. Micro Set, Micro Sol, Micro Mask, Micro Kristal Klear, 1 oz. Bottles, One of Each with Make Your Day Paintbrush Set : Toys & Games

Model setting solution for decals Micro Set MI-1