Two ways to attach the mesh to the screen printing frame - CPL
The mesh can be attached to the screen printing frame in two different ways:- using a manual stapler, as was done in the old days: the mesh is stapled along the entire perimeter of the upper face of the frame.You need one staple every two centimetres, and you need to make sure that the staple is at a slight angle to the direction of the weave, so that the two ends of the staple don't grip the same thread.- with a special bicomponent glue which should be spread on the upper face of the frame using a brush.The glue penetrates the mesh threads and sticks it to the frame. This second method works with both wood and metal frames.
2 Pcs of Silk Screen Printing Hinge Clamps for Screen
Tensioner And Clamps For Stringing Screen Printing - CPL Fabbrika
Fitting Mesh in a Screen Printing Frame : 7 Steps (with Pictures
How to make Mesh Screen Using Aluminum Frame and Mesh Stretcher
: Home & Kitchen
Screen Printing, the new complete set of screen printing, durable and safe screen printing kits, improved version, more suitable for beginners and
Retentionable (easy manual screen / mesh stretcher) screen
Screen Printing: Emulsion Adhesion And Mesh Preparation
Screen Printing: Emulsion Adhesion And Mesh Preparation
Fast stretching and exposure service for screen printing screens, ready in just 48 hours.
Stretched and Exposed screens ready in just two days. Sizes: Mini size - A4 - A3.
How To Expose A 24 Mesh Count Screen For Screenprinting
